F5F Stay Refreshed Hardware Desktop Adjust CPU voltage for I7-13700KF Reduce power consumption by lowering the clock speed safely

Adjust CPU voltage for I7-13700KF Reduce power consumption by lowering the clock speed safely

Adjust CPU voltage for I7-13700KF Reduce power consumption by lowering the clock speed safely

Pages (2): 1 2 Next
X
xRedxNightx
Member
176
10-06-2022, 07:54 AM
#1
You should consider it carefully. The suggested setting of 1.8V for core input voltage is lower than typical requirements, so verify if it meets your system's needs before changing it.
X
xRedxNightx
10-06-2022, 07:54 AM #1

You should consider it carefully. The suggested setting of 1.8V for core input voltage is lower than typical requirements, so verify if it meets your system's needs before changing it.

T
Thea77661
Member
58
10-10-2022, 04:46 PM
#2
I assume you're referring to temperatures that are too low for typical performance, like under 50°C or so.
T
Thea77661
10-10-2022, 04:46 PM #2

I assume you're referring to temperatures that are too low for typical performance, like under 50°C or so.

W
137
10-11-2022, 04:16 PM
#3
The main power supply voltage appears to be labeled VCCIN, which drives the built-in regulator supplying most internal voltages such as VDDQ TX and VCCSA. You should aim to boost this to 2V for a slight efficiency gain, but keep it at 1.8V unless you're concerned about the core voltage.
W
willowengstrom
10-11-2022, 04:16 PM #3

The main power supply voltage appears to be labeled VCCIN, which drives the built-in regulator supplying most internal voltages such as VDDQ TX and VCCSA. You should aim to boost this to 2V for a slight efficiency gain, but keep it at 1.8V unless you're concerned about the core voltage.

S
147
10-11-2022, 08:02 PM
#4
I didn't mention it's a GPU, but I saw temperatures around 100°C and performance dropped to 4.0 GHz.
S
Shadowxplayz23
10-11-2022, 08:02 PM #4

I didn't mention it's a GPU, but I saw temperatures around 100°C and performance dropped to 4.0 GHz.

Z
zknucklehead
Member
64
10-11-2022, 08:31 PM
#5
Yes, it would likely be safe to reduce the voltage by around 100mV.
Z
zknucklehead
10-11-2022, 08:31 PM #5

Yes, it would likely be safe to reduce the voltage by around 100mV.

_
_ImVentrix
Member
143
10-13-2022, 09:12 PM
#6
_
_ImVentrix
10-13-2022, 09:12 PM #6

P
PiggerTigger
Junior Member
10
10-18-2022, 03:06 PM
#7
I'm sorry for the inconvenience. How can I assist you?
P
PiggerTigger
10-18-2022, 03:06 PM #7

I'm sorry for the inconvenience. How can I assist you?

G
Gaspoda
Member
246
10-19-2022, 11:07 PM
#8
-Shift focus to CPUs, motherboards, and memory
-Errors are normal—don’t stress
G
Gaspoda
10-19-2022, 11:07 PM #8

-Shift focus to CPUs, motherboards, and memory
-Errors are normal—don’t stress

R
Raghava
Junior Member
17
10-19-2022, 11:54 PM
#9
Searching for VCore alternatives that work in offset mode. Confused about the options available.
R
Raghava
10-19-2022, 11:54 PM #9

Searching for VCore alternatives that work in offset mode. Confused about the options available.

G
GeorgePlaysFTW
Senior Member
261
10-21-2022, 01:34 AM
#10
Thank you very much
G
GeorgePlaysFTW
10-21-2022, 01:34 AM #10

Thank you very much

Pages (2): 1 2 Next