F5F Stay Refreshed Power Users Networks Adding a PC to the network in another room

Adding a PC to the network in another room

Adding a PC to the network in another room

Pages (2): 1 2 Next
M
Miyuumi
Senior Member
543
05-21-2023, 01:33 PM
#1
I have a PC which has to be in a different room (call it room B) to the one the router is in (room A). There is a telephone socket in room B. Can I use this to wire the PC to the network? This is with the thought that a wired connection may be better than the present wi-fi connection.
I assume I could do it by adding another router or perhaps with just a modem, but I know zilch.
M
Miyuumi
05-21-2023, 01:33 PM #1

I have a PC which has to be in a different room (call it room B) to the one the router is in (room A). There is a telephone socket in room B. Can I use this to wire the PC to the network? This is with the thought that a wired connection may be better than the present wi-fi connection.
I assume I could do it by adding another router or perhaps with just a modem, but I know zilch.

G
Ghost8460
Member
71
05-29-2023, 05:31 AM
#2
In general, no. Unless your current setup includes a recently constructed home with Ethernet cabling using cat5e within the past two decades, and that wiring already incorporates phone jacks with proper connections.
Ethernet cables contain eight internal wires, whereas older phone cords typically have six or four (for three or two lines) and lack the required twisting, which is mandated by Ethernet standards.
G
Ghost8460
05-29-2023, 05:31 AM #2

In general, no. Unless your current setup includes a recently constructed home with Ethernet cabling using cat5e within the past two decades, and that wiring already incorporates phone jacks with proper connections.
Ethernet cables contain eight internal wires, whereas older phone cords typically have six or four (for three or two lines) and lack the required twisting, which is mandated by Ethernet standards.

Z
Zk_Origins
Junior Member
12
06-14-2023, 06:11 PM
#3
How about linking the rooms using an Ethernet cable?
If the router only has one LAN port, you'll need another Ethernet switch as well.
Z
Zk_Origins
06-14-2023, 06:11 PM #3

How about linking the rooms using an Ethernet cable?
If the router only has one LAN port, you'll need another Ethernet switch as well.

M
MarioCovrigel
Member
195
06-15-2023, 12:21 AM
#4
Right. Are you asking if linking a new router to the telephone port and connecting an Ethernet cable from that router to the PC would prevent it from working?
M
MarioCovrigel
06-15-2023, 12:21 AM #4

Right. Are you asking if linking a new router to the telephone port and connecting an Ethernet cable from that router to the PC would prevent it from working?

D
Doctor_Pi
Member
214
06-15-2023, 02:50 AM
#5
The jacks differ significantly. It's impossible to connect an Ethernet cable with an RJ45 head to a phone jack with an RJ11 connector.
D
Doctor_Pi
06-15-2023, 02:50 AM #5

The jacks differ significantly. It's impossible to connect an Ethernet cable with an RJ45 head to a phone jack with an RJ11 connector.

M
Marinated
Senior Member
666
06-15-2023, 02:59 AM
#6
Fair enough, but I was trying to prevent estimating the length of cable needed for skirting boards and round door frames.
M
Marinated
06-15-2023, 02:59 AM #6

Fair enough, but I was trying to prevent estimating the length of cable needed for skirting boards and round door frames.

M
MoonMidnight
Member
159
06-15-2023, 03:44 AM
#7
I understand, that's why I believed I could use a modem (or router). - modem connects to telephone jack and ethernet from modem to PC
M
MoonMidnight
06-15-2023, 03:44 AM #7

I understand, that's why I believed I could use a modem (or router). - modem connects to telephone jack and ethernet from modem to PC

S
Spaceface16518
Senior Member
564
06-15-2023, 11:19 AM
#8
The DSL WAN side uses RJ11, while the LAN side uses RJ45. All computer devices rely on RJ45 except for the DSL modem's WAN port. Tape or Ethernet cables are affordable, or you can use your bed length as a guide.
S
Spaceface16518
06-15-2023, 11:19 AM #8

The DSL WAN side uses RJ11, while the LAN side uses RJ45. All computer devices rely on RJ45 except for the DSL modem's WAN port. Tape or Ethernet cables are affordable, or you can use your bed length as a guide.

I
ICroniX
Member
70
06-15-2023, 03:26 PM
#9
The best choice for the quickest network link is to connect the two areas using a network cable. This works if both the device and your router have an available RJ45 port. With a quality cable that has factory-connected ends, you can extend it up to 100 meters, allowing it to be hidden in doorways and along walls for better concealment.
I
ICroniX
06-15-2023, 03:26 PM #9

The best choice for the quickest network link is to connect the two areas using a network cable. This works if both the device and your router have an available RJ45 port. With a quality cable that has factory-connected ends, you can extend it up to 100 meters, allowing it to be hidden in doorways and along walls for better concealment.

R
randomabby
Senior Member
476
06-15-2023, 05:51 PM
#10
Thank you all for your feedback. It seems like you should keep using the wireless connection.
😏
R
randomabby
06-15-2023, 05:51 PM #10

Thank you all for your feedback. It seems like you should keep using the wireless connection.
😏

Pages (2): 1 2 Next