Adapter convert 24 pins to 6 pins
Adapter convert 24 pins to 6 pins
You're looking to upgrade your power supply for the Dell OptiPlex 3060. Since the motherboard only accepts a 6-pin main power connector, you'll need a 24-pin to 6-pin adapter. However, without the pinout diagram, it's hard to build it correctly. I recommend checking the official Dell documentation or contacting their support for the correct pin configuration. If you need help finding the right parts or understanding the pin layout, let me know!
I have a single unit to review. Check it out—there’s a small PCB managing power, as shown in the link below. It wasn’t about creating something from scratch; it just kept expanding after about eight months of use. I’m holding the adapter responsible, even though it was a high-quality PSU.
Explore further, this should function – it was the solution I tried for my 3040 to fit an ATX inside.
The adapter setup isn't advised at all—don't risk damaging your PSU!
I used an older PSU that was once a tier A model, but it failed after eight months. It might have simply aged, but I suspect this Chinese daisychain adapter could have contributed to the issue (you can see a PCB with capacitors in the photo). Would you recommend it, based on my experience?
Would you like to know if you can create your own adapter instead of purchasing one?