Activate onboard graphics settings for the BIOSTAR A320M-H motherboard
Activate onboard graphics settings for the BIOSTAR A320M-H motherboard
Check if the "Integrated Graphics" option can be switched from automatic to enabled. Some boards turn it off by default when a graphics card is installed, preventing the auto setting from activating it, even if you choose it as the main display device.
Assume main video device determines which "video card" is accessed first. IGD video instructs the BIOS to try using the built-in graphics first. If no display is connected via the motherboard ports or the screen doesn't respond quickly enough, the built-in card might say no monitors found and skip to another installed card. Ensure a monitor is plugged into the motherboard video ports. Pick IGD video, save your settings, reboot and power off the computer. Rearrange video cables to the internal connectors and then launch the PC. Edit: enable auto, shut down, make sure at least one monitor is on the motherboard slots and it should start using integrated graphics.
One display is linked to the graphics card and another to the main board
If you're only running two monitors, is there a reason you don't want to run both from the GTX 1060? I would only recommend using the iGPU for another monitor if you've run out of ports on your graphics card. For any GPU made in the last decade, running a web browser or any non-3D application on a second or third monitor is trivial - it won't impact performance in any meaningful way.
I need to purchase a converter for the screen. If no alternative exists, I'll proceed with the purchase.
You likely use the motherboard's VGA port because your monitor only supports VGA, while the GTX 1060 lacks that port but the motherboard does. The monitor can still function without the graphics card, as it relies on the port on the motherboard.
Disconnect monitor 1 from the graphics card and keep monitor 2 linked to the motherboard, but the issue persists. It seems the problem might be with the display adapter ("Adaptadores de pantalla"). Apart from the 1060 3G, the built-in graphics should also show up.
It seems the mainboard isn't recognizing the built-in graphics, which means Windows can't detect it. I recommended taking the graphics card out for a short time to test whether integrated graphics function without it. I'm curious if the presence of the card is interfering with the motherboard's ability to activate them, or if another issue is at play.