F5F Stay Refreshed Software Operating Systems Activate automatic restart feature for Windows 10.

Activate automatic restart feature for Windows 10.

Activate automatic restart feature for Windows 10.

G
Griinor
Member
54
05-14-2016, 12:09 PM
#1
Hi Everyone, I own a remote file server in an office where I don’t have direct access. It sometimes stops working after updates or power issues. I’m wondering if there’s a way to automatically restart Windows whenever it shuts down. Most of what I’ve read online says you can disable that feature, but I want to make sure it actually tries to reboot on its own. Since I’m not tech-savvy, I’d really appreciate any advice or guidance. Thanks!
G
Griinor
05-14-2016, 12:09 PM #1

Hi Everyone, I own a remote file server in an office where I don’t have direct access. It sometimes stops working after updates or power issues. I’m wondering if there’s a way to automatically restart Windows whenever it shuts down. Most of what I’ve read online says you can disable that feature, but I want to make sure it actually tries to reboot on its own. Since I’m not tech-savvy, I’d really appreciate any advice or guidance. Thanks!

P
194
05-15-2016, 12:48 PM
#2
Posted in the Windows forum area. Look for a BIOS/UEFI setting to restore the system after any power issue.
P
PanicOregon281
05-15-2016, 12:48 PM #2

Posted in the Windows forum area. Look for a BIOS/UEFI setting to restore the system after any power issue.

A
alexTNT377
Junior Member
49
05-15-2016, 08:59 PM
#3
The system should include a BIOS setting for this feature. Options might involve A/C shutdown or similar actions.
A
alexTNT377
05-15-2016, 08:59 PM #3

The system should include a BIOS setting for this feature. Options might involve A/C shutdown or similar actions.

E
ExplodingOzzy
Junior Member
15
05-17-2016, 05:41 AM
#4
I didn't consider checking the BIOS settings. I'll make sure to look into it during my next visit to the office. Remote access to BIOS isn't possible right now, so I'll research further. Thanks!
E
ExplodingOzzy
05-17-2016, 05:41 AM #4

I didn't consider checking the BIOS settings. I'll make sure to look into it during my next visit to the office. Remote access to BIOS isn't possible right now, so I'll research further. Thanks!

D
DivinFighter
Member
53
05-17-2016, 07:16 AM
#5
Yea you have to be physically there, as there is no OS at this level. Well that is kinda a lie, some pre-build system like Dell has enterprise software that you get from them to remotely change some BIOS/UEFI setting over network. But in general, you have to be physically there on the system with a keyboard, mouse and screen.
D
DivinFighter
05-17-2016, 07:16 AM #5

Yea you have to be physically there, as there is no OS at this level. Well that is kinda a lie, some pre-build system like Dell has enterprise software that you get from them to remotely change some BIOS/UEFI setting over network. But in general, you have to be physically there on the system with a keyboard, mouse and screen.

C
Caribbean_Blue
Senior Member
609
05-20-2016, 06:23 AM
#6
This BIOS/UEFI method won't function if Windows shuts down on its own. It only works when the power supply gets connected or disconnected. If someone unplugs and replugs it, it should start normally. (Ignoring any risk of OS damage from just removing the power cable) Besides checking the BIOS/UEFI, ensure Windows 10 always reboots after updates instead of shutting down. *Note: to keep things under control, you might disable automatic updates so you have more control over reboots. *Note2: I took out my power switch from the case. Now I must turn on or off the PC by changing the power, just like everyone discussed. It works perfectly, always. But you may want to wait about 10-15 seconds after disconnecting all capacitors in your hardware before trying to start it.*
C
Caribbean_Blue
05-20-2016, 06:23 AM #6

This BIOS/UEFI method won't function if Windows shuts down on its own. It only works when the power supply gets connected or disconnected. If someone unplugs and replugs it, it should start normally. (Ignoring any risk of OS damage from just removing the power cable) Besides checking the BIOS/UEFI, ensure Windows 10 always reboots after updates instead of shutting down. *Note: to keep things under control, you might disable automatic updates so you have more control over reboots. *Note2: I took out my power switch from the case. Now I must turn on or off the PC by changing the power, just like everyone discussed. It works perfectly, always. But you may want to wait about 10-15 seconds after disconnecting all capacitors in your hardware before trying to start it.*

Z
Zoizzois
Junior Member
3
05-20-2016, 07:11 AM
#7
Consider this, there might be a GPO to turn off the shutdown feature in Windows... I'm recalling from memory, though I shouldn't be too sure, but it's worth checking.
Z
Zoizzois
05-20-2016, 07:11 AM #7

Consider this, there might be a GPO to turn off the shutdown feature in Windows... I'm recalling from memory, though I shouldn't be too sure, but it's worth checking.