F5F Stay Refreshed Hardware Desktop Abit AV8 uses post code 3, then shifts to 0.2. No beeps detected. Power button inactive. No fan operation observed.

Abit AV8 uses post code 3, then shifts to 0.2. No beeps detected. Power button inactive. No fan operation observed.

Abit AV8 uses post code 3, then shifts to 0.2. No beeps detected. Power button inactive. No fan operation observed.

B
BountyHunter22
Junior Member
Find
33
06-18-2020, 08:34 PM
#1
Take a quick glance above. RAM, GPU, and CPU are all functioning properly. The power supply works too, though it might not be sufficient (?) It can deliver up to 22 amps on the 5V rail, which is confusing since you’re having trouble getting the board to boot with two different PSUs now. My thought is a corrupted BIOS and I don’t want to spend money ordering a new chip from abroad just to keep this old build running.
Reply
Reply
B
BountyHunter22
06-18-2020, 08:34 PM #1

Take a quick glance above. RAM, GPU, and CPU are all functioning properly. The power supply works too, though it might not be sufficient (?) It can deliver up to 22 amps on the 5V rail, which is confusing since you’re having trouble getting the board to boot with two different PSUs now. My thought is a corrupted BIOS and I don’t want to spend money ordering a new chip from abroad just to keep this old build running.

Reply
Reply
B
Brudora
Senior Member
Find
726
06-25-2020, 11:41 PM
#2
It turns out I made a mistake. The guide for the motherboard I checked mentioned those pins were at one spot, but the actual manual says they’re elsewhere. Thanks for the patience—three weeks lost on this front panel issue is rough.
Reply
Reply
B
Brudora
06-25-2020, 11:41 PM #2

It turns out I made a mistake. The guide for the motherboard I checked mentioned those pins were at one spot, but the actual manual says they’re elsewhere. Thanks for the patience—three weeks lost on this front panel issue is rough.

Reply
Reply