F5F Stay Refreshed Power Users Overclocking A10 7700k with extreme overclocking on a stock cooler?

A10 7700k with extreme overclocking on a stock cooler?

A10 7700k with extreme overclocking on a stock cooler?

Pages (2): 1 2 Next
T
TRy_iTempo_
Junior Member
27
10-20-2017, 05:35 PM
#1
Hello, I own an A-10 7700k with a 750ti and successfully boosted it to 4.4Ghz without exceeding it. On prime 95 it maintains a 12°C thermal margin, which suggests that at 0°C the system would likely shut down, underclock, or apply undervolting, or worse, cause the CPU to fail. So, what makes 4.4Ghz achievable on a stock cooler? The default is 3.4Ghz. Can I push it further? Is this risky? Thanks!
T
TRy_iTempo_
10-20-2017, 05:35 PM #1

Hello, I own an A-10 7700k with a 750ti and successfully boosted it to 4.4Ghz without exceeding it. On prime 95 it maintains a 12°C thermal margin, which suggests that at 0°C the system would likely shut down, underclock, or apply undervolting, or worse, cause the CPU to fail. So, what makes 4.4Ghz achievable on a stock cooler? The default is 3.4Ghz. Can I push it further? Is this risky? Thanks!

M
MavrosGR
Senior Member
579
10-21-2017, 01:51 AM
#2
Letten shared a photo of an AMD cooler and mentioned having a standard one. It seems you might also need good case cooling, but as long as temperatures remain stable, everything should be fine. Keep monitoring closely.
M
MavrosGR
10-21-2017, 01:51 AM #2

Letten shared a photo of an AMD cooler and mentioned having a standard one. It seems you might also need good case cooling, but as long as temperatures remain stable, everything should be fine. Keep monitoring closely.

T
tada_da
Member
128
10-21-2017, 02:37 AM
#3
It seems you think extreme overclocking isn't advisable for any air cooler, particularly a standard one.
T
tada_da
10-21-2017, 02:37 AM #3

It seems you think extreme overclocking isn't advisable for any air cooler, particularly a standard one.

D
donutz445
Junior Member
13
10-21-2017, 11:13 AM
#4
When running in idle mode it maintains a thermal margin of 40°C, and under full load it stays within 10-15°C.
D
donutz445
10-21-2017, 11:13 AM #4

When running in idle mode it maintains a thermal margin of 40°C, and under full load it stays within 10-15°C.

A
A_Sound
Senior Member
486
10-26-2017, 02:48 PM
#5
When reaching 0 it will slow down and then stop eventually yes.
Regarding how this happens, do you have the Wraith cooler? It performs well.
This chip has a low TDP, which means it’s not unexpected to handle such an overclock with that cooler.
A
A_Sound
10-26-2017, 02:48 PM #5

When reaching 0 it will slow down and then stop eventually yes.
Regarding how this happens, do you have the Wraith cooler? It performs well.
This chip has a low TDP, which means it’s not unexpected to handle such an overclock with that cooler.

P
PavlicekF
Junior Member
20
10-30-2017, 01:42 AM
#6
I don't have any special knowledge, just a general idea that stock coolers lack the power needed for heavy overclocking.
P
PavlicekF
10-30-2017, 01:42 AM #6

I don't have any special knowledge, just a general idea that stock coolers lack the power needed for heavy overclocking.

B
BlueStar_LH
Posting Freak
842
11-03-2017, 08:44 AM
#7
I personally adjusted my FX-4300 to 4.7 GHz, which felt like a 9590 with four cores using the original cooler. Mobo began to slow down afterward.
B
BlueStar_LH
11-03-2017, 08:44 AM #7

I personally adjusted my FX-4300 to 4.7 GHz, which felt like a 9590 with four cores using the original cooler. Mobo began to slow down afterward.

S
snuttisnutti
Member
206
11-16-2017, 11:42 PM
#8
I'm not an expert, but I think stock coolers lack the power needed for heavy overclocking. They don't really handle extreme overclocking, though they work fine in most cases. For CPUs that don't require it, a low TDP setup is manageable. Still, it's better to keep temperatures a bit lower, which means an aftermarket cooler would be more suitable.
S
snuttisnutti
11-16-2017, 11:42 PM #8

I'm not an expert, but I think stock coolers lack the power needed for heavy overclocking. They don't really handle extreme overclocking, though they work fine in most cases. For CPUs that don't require it, a low TDP setup is manageable. Still, it's better to keep temperatures a bit lower, which means an aftermarket cooler would be more suitable.

U
UniqueSecret
Junior Member
10
11-17-2017, 04:09 AM
#9
I don't possess the more advanced cooler, just a standard AMD one.
http://images.bit-tech.net/content_image...a10-2b.jpg
U
UniqueSecret
11-17-2017, 04:09 AM #9

I don't possess the more advanced cooler, just a standard AMD one.
http://images.bit-tech.net/content_image...a10-2b.jpg

P
Pickmaster12
Senior Member
710
11-23-2017, 11:39 AM
#10
Letten:
I don't have that cooler, I just have a standard AMD cooler.
Check this image: http://images.bit-tech.net/content_image...a10-2b.jpg
It's interesting, you seem to have good case cooling too. As long as the temperatures remain stable, I think you're fine. Just keep monitoring them closely.
P
Pickmaster12
11-23-2017, 11:39 AM #10

Letten:
I don't have that cooler, I just have a standard AMD cooler.
Check this image: http://images.bit-tech.net/content_image...a10-2b.jpg
It's interesting, you seem to have good case cooling too. As long as the temperatures remain stable, I think you're fine. Just keep monitoring them closely.

Pages (2): 1 2 Next