F5F Stay Refreshed Hardware Desktop A suitable temperature for RAM is typically between 0°C and 50°C, depending on the specific component and environment.

A suitable temperature for RAM is typically between 0°C and 50°C, depending on the specific component and environment.

A suitable temperature for RAM is typically between 0°C and 50°C, depending on the specific component and environment.

X
Xalabuda
Junior Member
12
02-15-2023, 04:23 AM
#1
A suitable temperature range for your setup is typically between 30°C to 45°C. Your current specs suggest a good balance, especially with XMP settings handling stress levels around 39-44°C. The mention of 40+ and 70+ seems to come from different benchmarks or specific use cases, so it's worth double-checking your environment and cooling system.
X
Xalabuda
02-15-2023, 04:23 AM #1

A suitable temperature range for your setup is typically between 30°C to 45°C. Your current specs suggest a good balance, especially with XMP settings handling stress levels around 39-44°C. The mention of 40+ and 70+ seems to come from different benchmarks or specific use cases, so it's worth double-checking your environment and cooling system.

S
Sqwalish
Member
155
02-20-2023, 06:26 PM
#2
I aim for a range of the upper 20s to mid-30s. At idle they generally stay around the low 20s.
S
Sqwalish
02-20-2023, 06:26 PM #2

I aim for a range of the upper 20s to mid-30s. At idle they generally stay around the low 20s.

H
Hisata
Junior Member
12
02-20-2023, 08:24 PM
#3
It seems there might be an issue with my RAM. My PC model is a Ryzen 9 5900X GF 1070 Gigabyte ASUS TUF GAMING X570-PLUS G.Skill Trident Z Neo, DDR4, 32 GB, 3600MHz, CL16 SeaSonic Prime GX 850W (SSR-850GD).
H
Hisata
02-20-2023, 08:24 PM #3

It seems there might be an issue with my RAM. My PC model is a Ryzen 9 5900X GF 1070 Gigabyte ASUS TUF GAMING X570-PLUS G.Skill Trident Z Neo, DDR4, 32 GB, 3600MHz, CL16 SeaSonic Prime GX 850W (SSR-850GD).

C
csige791
Posting Freak
818
02-25-2023, 10:53 AM
#4
Adjust settings carefully to maximize performance, and keep in mind the 3600 cl16 spec—check the burner options as well. Any solid chip should handle around 4000 cl14 at about 1.5v.
C
csige791
02-25-2023, 10:53 AM #4

Adjust settings carefully to maximize performance, and keep in mind the 3600 cl16 spec—check the burner options as well. Any solid chip should handle around 4000 cl14 at about 1.5v.

L
livtheviking
Posting Freak
846
02-26-2023, 02:27 PM
#5
I don't even consider things like overclocking. My computer crashes unexpectedly, but this isn't a consistent issue—stress tests reveal nothing, etc. So I'm getting overwhelmed trying to figure it out... I'll submit a ticket to G.Skill then I'll find the answer.
L
livtheviking
02-26-2023, 02:27 PM #5

I don't even consider things like overclocking. My computer crashes unexpectedly, but this isn't a consistent issue—stress tests reveal nothing, etc. So I'm getting overwhelmed trying to figure it out... I'll submit a ticket to G.Skill then I'll find the answer.

M
mcmack05
Member
199
02-27-2023, 12:34 PM
#6
Ensure minimal airflow across the DIMM components; it should be okay.
M
mcmack05
02-27-2023, 12:34 PM #6

Ensure minimal airflow across the DIMM components; it should be okay.

A
axel_76120
Junior Member
49
02-27-2023, 02:28 PM
#7
Dont see an issue. But you can get fancy and get some water blocks for them. More baller than rgb, thats for sure.
A
axel_76120
02-27-2023, 02:28 PM #7

Dont see an issue. But you can get fancy and get some water blocks for them. More baller than rgb, thats for sure.

M
mj18wals
Senior Member
256
02-27-2023, 09:55 PM
#8
Performance and quiet operation usually aren't compatible. My usage is intense enough that I skip the exhaust fan. 3K rippers are tough, but they need control. If your GPU feels hot, place a fan on top and direct it toward your CPU.
M
mj18wals
02-27-2023, 09:55 PM #8

Performance and quiet operation usually aren't compatible. My usage is intense enough that I skip the exhaust fan. 3K rippers are tough, but they need control. If your GPU feels hot, place a fan on top and direct it toward your CPU.