A solid DDR4 motherboard for your I7-12700KF and RTX3060 would be the B550 or B650 series.
A solid DDR4 motherboard for your I7-12700KF and RTX3060 would be the B550 or B650 series.
Also, what do you think about the GIGABYTE B660 AORUS MASTER DDR4?
This Corsair Vengeance LPX offers 32GB of storage split across two 16GB modules with 3600MHz dual-channel RAM. It’s a solid choice for performance, especially if you need fast memory for gaming or multitasking.
Perfect reliability. It’s hard to keep the same opinion for hours without it affecting your overall judgment. I’d probably go all-in on a high-end setup like the Gigabyte Z690 Aorus Elite AX. I’m not a big fan of Gigabytes, but their top models are getting better. With the 12th generation they’ve been a bit inconsistent, but as long as you keep updating the BIOS, it works fine.
You're receiving some uncertain suggestions in this discussion. Higher-end Aorus boards work well, and a 12700f/B660 or H610 setup is fine if you don't intend to overclock. Performance remains similar regardless of the choice, except for those who like pushing limits.
In reality, the differences between the Z690 A Pro and Tomahawk models versus the Z690 UD and Aorus Elite Ax seem minimal, especially for gaming purposes. It makes sense to opt for the Aero G version. Speaking of upgrades, Z690 Aero G offers plenty of expansion options—around 10 USB 3, 8 USB 2, and a few USB 3.3 headers if you count them—but only if you really need it. Otherwise, the Z690 UD or A650 Pro are more common, and they’re typically around 1333 MHz, which is an OEM DDR3 configuration. If you don’t need that much RAM, it’s a budget-friendly choice. Most Samsung bare PCBs support 2133-2666 MHz DDR4, and you’ll likely get more than that without extra cost. The main downside is needing to overclock, but you can usually set it to 3600 MHz with standard timings. The H610 model is a bit shaky, often showing poor VRM ratings and limited overclock potential. If you’re aiming for an I7 processor, a B660 might be a better fit since it’s priced similarly to the K series and overclocking is less of an issue. For OC work, you can usually stick with 3600 MHz and let the board handle the rest at lower voltages. RAM capacity is usually where you’ll find the real differences, with options ranging from 3200 to 3600 MHz depending on the board. The Gigabyte UD boards are essentially priced the same as the B660 gaming models and include Wi-Fi in the Z690 A Pro version at the same cost.
I must have either not seen the Aero G or it didn't show up in PCPP, man that looks like a pretty nice board. Only thing I do not like about it is that it looks like Gigabyte once again cramped the absolute hell out of the socket with an obnoxiously sized IO-side heatsink heatchunk. Not that it's exclusive to that model, now that I'm looking through Gigabyte's catalog it seems like they do it on a TON of boards, including the one I recommended. That's literally one of the biggest complaints I have with my board, the Z690I Aorus Ultra.