A Power Adapter serving as a substitute for a PoE switch in an access point setup
A Power Adapter serving as a substitute for a PoE switch in an access point setup
Can a power adapter be used to operate this access point?
Its PSE was broken, I’m looking for the most affordable option.
I tried several power adapters but they didn’t work properly since the signal wasn’t detected.
I need your assistance in finding some links to purchase the right adapter for this access point.
Thank you very much.
There are numerous variations that correspond to your general part number.
This document indicates that an 802.3af (standard POE) is sufficient.
Many Ubiquiti POE injectors are available on eBay, such as this one —
https://www.ebay.com/itm/185905007970
The important point is to confirm it is a 48V "af" model, not a 24V passive version.
NO.
https://www.ruijie.com/en-global/product...rg-ap720-l
Power Supply and Consumption
RG-AP720-L
Input power supply
The AP offers two power supply options:
● 12 V DC/1.5 A input via DC connector: Accepts a 2.1 mm/5.5 mm center-positive circular plug; a separate DC adapter must be bought.
● PoE input over LAN 1: Complies with IEEE 802.3af standard (PoE).
Please note:
● When both DC and PoE are available, DC power is preferred.
Choose either the 12V / 1.2A DC adapter with the correct plug or a PoE Injector.