A lesson about Overclocking
A lesson about Overclocking
My build includes an i7 6700k, Corsair H115i, RM750i, MSI Z170A Pro Carbon, GSKill Ripjaw 16GB 3200mhz, and Intel HD Graphics 530. I tried to overclock it by following online guides, adjusting XMP settings, and increasing the voltage slightly. After stress testing, the frequency dropped back to 4GHz but the voltage remained at 1.2V instead of the target 1.35V. When I tried resetting the BIOS, the system booted briefly before looping again. I also removed the CMOS battery for a while and then reinserted it, which helped the computer start properly. However, the monitor didn’t appear, and my peripherals weren’t detected. I’m worried about potential damage from overclocking or voltage issues. Could you help me identify where I went wrong? Was rushing to 4.5GHz the cause? And could there be a problem with the graphics card or DVI port?
I'm not an expert, but I take this with a grain of salt. At first, I don't think the drop in clock and voltage was unusual—it might have been a power-saving feature if the CPU didn't need to run at full speed. After rebooting, I have no idea what caused it. It could have been several things. I’d recommend checking your BIOS again and confirming the version number, making sure it’s up to date. As for the screen flickering, I don’t know the cause. I’d look into what a normal OC clock is for a 6700k processor and try adjusting it by 200 MHz lower, but first I should read through a tutorial.
I'm not an expert, but I take this with a grain of salt. At first, I don't think the drop in clock and voltage was unusual—it might have been a power-saving feature if the CPU didn't need to run at full speed. After rebooting, I have no idea what caused it. It could have been several things. I’d recommend checking your BIOS again and confirming the version number, making sure it’s up to date. As for the screen flickering, I don’t know the cause. I’d look into what a normal OC clock is for a 6700k processor and try adjusting it by 200 MHz lower, but first I should read through a tutorial.
Consider trying 4.5GHz with slightly higher voltage first, or begin gradually increasing the settings.
wouldn't exceed 1.4, aiming for the maximum clock speed while minimizing power consumption since higher voltages reduce lifespan. often the voltage instability itself causes issues. if you haven't tested 4.5 at standard voltage, start there first, then move to 1.2 and 1.3. If it doesn't return to stock voltage and you try 4.4 and beyond, continue accordingly.