A 11-year-old computer might have a failing RAM, causing slow performance or crashes.
A 11-year-old computer might have a failing RAM, causing slow performance or crashes.
Thanks! I’ll give it a shot. I actually have some extra RAM sticks from an old computer I owned, though I’m not entirely sure what they are.
You inspected the power supply capacitors, hoping to find all of them since hidden ones can exist in a PSU. What about the motherboard? I had a faulty capacitor on it a few months ago. You mentioned you don’t have a DVM or any testing tools? Here, the oldest meter I own is my mother’s and it’s around 60 years old. I’d recommend using something more recent. Also, perform some tests on the PSU output. Regarding installing an SSD, they work with systems older than a few years—my most recent fit was about 14 years ago.
A DVM functions as a Digital Volt Meter, also known as a DMM. There are three units available here, with five more at the shed. These devices help verify battery levels in radios or torches, check TV remote functionality, determine voltages from the computer power supply, assess car battery condition, and compare storage formats. If a standard hard disk fits your computer, an SSD will also fit, matching the dimensions of 2-1/2" HDDs. For systems with a 3-1/2" HDD—like the one I worked on yesterday—the mounting screws differ: 3.5 mm for the 3-1/2" model and 2.5 mm for the 2-1/2" and SSD. I secured the SSD using cellotape until I could install the correct screws. Regarding technical updates, have you made any changes? Have you worked with wood? Updated your car’s oil? Replaced batteries in your torch? Repaired electrical components? Did you perform any metalwork? As my mother did, I’m confident I can handle these tasks myself. I’ll admit I won’t ask for welding help from anyone. Why? Because my daughter took her welder and lathe and traveled 1000 km away.
Oh no, I don't have anything like that. I remember my dad had something similar a long time ago. But honestly, I haven't touched his belongings since he left. So I have no idea where it might be, even here. I'll need to check it out. What do you think would work best? Yes, I've worked with wood—refinishing, carving, staining, etc.—I learned how to change an oil once from my uncle. We use rechargeable flashlights because batteries are a waste, and yes, I can handle electrical repairs if you follow the steps. For metalwork, that's way beyond my budget. Wanted to try, but for the classes nearby it's around $140 per session and you pay for the materials you choose. That extra cost is included. Though I'm not sure how this connects to the computer.