9 bits fans, consolidating into a single argb header

Pages (2): 1 2 Next

xX_IceyWolf_Xx
Senior Member

629

06-04-2016, 11:02 PM

Hello, your setup sounds like it could work if everything is properly connected. The cable you have should allow you to link the 9 argb fans and the two argb/pwm hubs via SATA power connectors. Just make sure all connections are secure and follow the manufacturer’s guidelines. If you're unsure about any part, double-check the specifications for your board and hubs.

xX_IceyWolf_Xx

06-04-2016, 11:02 PM #1

ZzeoTexX
Member

238

06-05-2016, 02:23 AM

When ARGB comes from the hub, you can manage it via one header. But attempting to power nine devices through a single header isn't recommended.

ZzeoTexX

06-05-2016, 02:23 AM #2

When ARGB comes from the hub, you can manage it via one header. But attempting to power nine devices through a single header isn't recommended.

Lina_Dragnil
Junior Member

06-12-2016, 11:51 PM

Check the connection diagram or wiring labels to confirm both ports are linked. Verify with a multimeter or test the output of each port individually.

Lina_Dragnil

06-12-2016, 11:51 PM #3

Check the connection diagram or wiring labels to confirm both ports are linked. Verify with a multimeter or test the output of each port individually.

Slender_PvP
Junior Member

06-13-2016, 01:07 AM

I'll take my reliable multimeter.

Slender_PvP

06-13-2016, 01:07 AM #4

I'll take my reliable multimeter.

DJBazzInc
Member

231

06-14-2016, 12:07 AM

Please confirm if you have details about connecting it this way.

DJBazzInc

06-14-2016, 12:07 AM #5

Please confirm if you have details about connecting it this way.

Xelo24
Member

178

06-14-2016, 02:01 AM

You're using 13 fans per Argb header, but the controller supports up to 16 fans.

Xelo24

06-14-2016, 02:01 AM #6

You're using 13 fans per Argb header, but the controller supports up to 16 fans.

JunkdudeHD
Junior Member

06-19-2016, 01:01 AM

I have two hubs with six fan slots and one connector linking an AGB to two AGBs.

JunkdudeHD

06-19-2016, 01:01 AM #7

I have two hubs with six fan slots and one connector linking an AGB to two AGBs.

brobear7
Posting Freak

892

06-19-2016, 06:32 AM

When the light turns on without the argb header, it sends signals only through the argb header to the mainboard.

brobear7

06-19-2016, 06:32 AM #8

When the light turns on without the argb header, it sends signals only through the argb header to the mainboard.

Wazass
Junior Member

06-19-2016, 08:09 AM

This information is useful, the remaining parts will be delivered tomorrow, I'll review it.

Wazass

06-19-2016, 08:09 AM #9

This information is useful, the remaining parts will be delivered tomorrow, I'll review it.

Abe_YouTube7
Member

125

06-19-2016, 11:37 AM

#10

You may face restrictions on the number of LEDs you can illuminate, based on the available channels it supports.

Abe_YouTube7

06-19-2016, 11:37 AM #10

You may face restrictions on the number of LEDs you can illuminate, based on the available channels it supports.

Pages (2): 1 2 Next