8086k and boosting performance on the Aorus Z390 Master F11 BIOS
8086k and boosting performance on the Aorus Z390 Master F11 BIOS
Hello, I just acquired a Z390 Master motherboard to pair with my 8086K. This one is positioned on a maximux hero X, which I consider fairly unstable, so I opted for an Aorus model that someone recommended. Here are the configurations I applied on the Aorus board. I didn’t have time to thoroughly stress test Prime because I was working from home at the time... Are there any settings or options that seem incorrect to you? Thanks, Cinebench R15: 1508 Cinebench r20: 3601 Real-time Cinebench R15: 1612 Real-time Cinebench r20: 3964 Advanced frequency settings CPU base clock 100 CPU upgrade: auto Enhanced multi-core performance: enabled CPU clock ratio 50 FCLK frequency for early power on: 1Ghz XMP profile 1 Advanced CPU core settings AVX offset: 0 Uncore ratio: 47 Intel turbo boost technology: on Cores: 50 all-core C state enabled (ADVANCED VOLTAGE SETTINGS) Advanced power settings CPU internal AC/DC Load Lines: auto CPU VCORE loadline calibration High CPU VCore control Manual CPU vcore: 1 31 CPU VCCIO 1.05 CPU SA: 1.15 CPU current limit 255 CPU vcore PWM switch rate: 300 VAXG PWM switch rate: auto PWM phase control: auto VAGX phase control: auto Cinebench R15: 1508 Cinebench r20: 3601 Real-time Cinebench R15: 1612 Real-time Cinebench r20: 3964