6600K and H115i

Pages (2): 1 2 Next

EndKnight02
Junior Member

04-25-2016, 09:08 PM

I pushed my CPU to its limits with prime 95 and stock clock speeds, achieving an average temperature of about 58°C. Is there anything unusual happening?

EndKnight02

04-25-2016, 09:08 PM #1

I pushed my CPU to its limits with prime 95 and stock clock speeds, achieving an average temperature of about 58°C. Is there anything unusual happening?

Trillex07
Member

05-03-2016, 03:11 PM

Artic MX-4 performs well, Tuniq and Gelid both contain effective compounds as well.

Trillex07

05-03-2016, 03:11 PM #2

Artic MX-4 performs well, Tuniq and Gelid both contain effective compounds as well.

GodNanners
Junior Member

05-09-2016, 07:34 PM

58 during stress testing it's beneficial
😉

GodNanners

05-09-2016, 07:34 PM #3

58 during stress testing it's beneficial
😉

EnderloxIceDJ
Member

05-10-2016, 04:13 AM

There might be room for improvement, but temperatures are fine. The voltage was boosted to 4.4 at 1.325 volts, reaching 65-70°C depending on the cores and cooler type. I suggest enhancing case ventilation or using better thermal paste for optimal performance and durability.

EnderloxIceDJ

05-10-2016, 04:13 AM #4

lTalonzl
Member

147

05-30-2016, 02:21 AM

I think swapping the stock thermal paste could be a good move. Do you have any suggestions?

lTalonzl

05-30-2016, 02:21 AM #5

I think swapping the stock thermal paste could be a good move. Do you have any suggestions?

SoapPvP
Member

06-01-2016, 12:44 PM

Artic MX-4 performs well, Tuniq and Gelid both contain effective compounds as well.

SoapPvP

06-01-2016, 12:44 PM #6

Artic MX-4 performs well, Tuniq and Gelid both contain effective compounds as well.

SillyKitty542
Member

06-01-2016, 07:52 PM

I believe those brands aren't commonly available in my country. I discovered a seller for the Noctua NT H1, but that doesn't necessarily mean it's popular there.

SillyKitty542

06-01-2016, 07:52 PM #7

I believe those brands aren't commonly available in my country. I discovered a seller for the Noctua NT H1, but that doesn't necessarily mean it's popular there.

Froz3ndoughboy
Junior Member

06-05-2016, 11:01 AM

It should be fine
😉

Froz3ndoughboy

06-05-2016, 11:01 AM #8

It should be fine
😉

ImS4G
Member

06-08-2016, 03:39 AM

Just to check in, I re-applied the thermal paste (managed to get lucky with the Arctic MX-4) and my idle temps are still near 37. Is that correct?

ImS4G

06-08-2016, 03:39 AM #9

Just to check in, I re-applied the thermal paste (managed to get lucky with the Arctic MX-4) and my idle temps are still near 37. Is that correct?

lol_Angela_lol
Member

217

06-08-2016, 12:16 PM

#10

Just to check in, I re-applied the thermal paste (managed to get lucky on the Arctic MX-4) and my idle temps are still near 37. Is everything okay?

lol_Angela_lol

06-08-2016, 12:16 PM #10

Just to check in, I re-applied the thermal paste (managed to get lucky on the Arctic MX-4) and my idle temps are still near 37. Is everything okay?

Pages (2): 1 2 Next