6-in-1 fan splitter device
6-in-1 fan splitter device
There’s a slight adjustment needed depending on the motherboard, the fan header’s current capacity, and the actual fans. Each fan has a specific current rating, so check the total draw and compare it to the header’s limits. For example, six fans at 0.25A each would total 1.5A—safe for that header. If using higher-rated fans like server models at 0.4A, the total would reach 2.4A and could overload it. Most consumer fans sit between 0.15A and 0.33A, making 6 to 1 splitters generally safe unless you use a hub, which often has its own power setup.
Corsair ll120 fans operate at 0.3A, meaning six units draw 1.8A each, which is below the 2A capacity of the header. Therefore, it's feasible to install six fans on one header (though using seven would require a separate SATA power cable).
Your fans are each drawing 0.3A, which is within the typical range for Corsair RGB hubs. That should work fine.