F5F Stay Refreshed Hardware Desktop 4x32 or 4x64 depending on configuration

4x32 or 4x64 depending on configuration

4x32 or 4x64 depending on configuration

Pages (2): 1 2 Next
S
Slow_Burn351
Member
78
02-24-2023, 10:42 PM
#1
S
Slow_Burn351
02-24-2023, 10:42 PM #1

G
gabbylife
Member
228
02-26-2023, 07:30 AM
#2
Asrock states you can't exceed 2666MHz on your board. Instead, I'm using 4x32G dimms at 3800MHz without issues (they're all the same). Combining them often depends on chance. It's possible they'll align perfectly at the same frequency and voltage, or you might be limited to 2133MHz.
G
gabbylife
02-26-2023, 07:30 AM #2

Asrock states you can't exceed 2666MHz on your board. Instead, I'm using 4x32G dimms at 3800MHz without issues (they're all the same). Combining them often depends on chance. It's possible they'll align perfectly at the same frequency and voltage, or you might be limited to 2133MHz.

S
seaturtle1985
Junior Member
38
02-26-2023, 07:50 AM
#3
Functions well at XMP frequencies without problems. However, only experience confirms the outcome.
S
seaturtle1985
02-26-2023, 07:50 AM #3

Functions well at XMP frequencies without problems. However, only experience confirms the outcome.

H
HoundLynx
Member
233
02-27-2023, 10:14 PM
#4
Avoid the extra 16GB RAM unless necessary; stick with two 16GB modules. It will run smoother without XMP complications.
H
HoundLynx
02-27-2023, 10:14 PM #4

Avoid the extra 16GB RAM unless necessary; stick with two 16GB modules. It will run smoother without XMP complications.

H
Hiduok
Member
65
02-28-2023, 03:09 AM
#5
I own roughly 30 frequently used tabs in Chrome, another 10 on Edge, plus programming tools—so I really need plenty of memory. Back then everything wasn’t as optimized, but now Linux feels much more efficient. After launching a VM, it only used about 300MB with Mozilla and 8 open tabs. I can handle 300 tabs now, haha.
H
Hiduok
02-28-2023, 03:09 AM #5

I own roughly 30 frequently used tabs in Chrome, another 10 on Edge, plus programming tools—so I really need plenty of memory. Back then everything wasn’t as optimized, but now Linux feels much more efficient. After launching a VM, it only used about 300MB with Mozilla and 8 open tabs. I can handle 300 tabs now, haha.

E
EisTeeKlaus
Senior Member
490
02-28-2023, 03:37 AM
#6
You're asking if you really need more than 32GB. Even with 50 tabs, it's about 5GB; 8GB is plenty. I own 64GB but only use around 30GB, thanks to the 16GB RAM cache!
E
EisTeeKlaus
02-28-2023, 03:37 AM #6

You're asking if you really need more than 32GB. Even with 50 tabs, it's about 5GB; 8GB is plenty. I own 64GB but only use around 30GB, thanks to the 16GB RAM cache!

V
VitoSEXY
Posting Freak
797
02-28-2023, 10:42 AM
#7
I noticed Firefox doesn't load tabs after restoring them; it only shows active ones and begins loading them again when you open them, which helps conserve memory if you have many tabs from a previous session and only use a few.
V
VitoSEXY
02-28-2023, 10:42 AM #7

I noticed Firefox doesn't load tabs after restoring them; it only shows active ones and begins loading them again when you open them, which helps conserve memory if you have many tabs from a previous session and only use a few.

A
Adamskim2003
Member
116
02-28-2023, 11:53 AM
#8
I also observed that Chrome prioritizes the most active tabs after restoring the theme.
A
Adamskim2003
02-28-2023, 11:53 AM #8

I also observed that Chrome prioritizes the most active tabs after restoring the theme.

A
Aura_
Member
91
03-01-2023, 07:34 AM
#9
That's a great reminder about cache! I'll need to adjust my plan when I install the 32GB drive. Yes, I'll be able to use more space—hopefully enough to render the full motherboard files now. I had been wanting to try CAD before, but my old laptop was limited to around 8GB RAM and couldn't handle it properly. I already purchased the 32GB set because I got a 17 euro discount for it.
A
Aura_
03-01-2023, 07:34 AM #9

That's a great reminder about cache! I'll need to adjust my plan when I install the 32GB drive. Yes, I'll be able to use more space—hopefully enough to render the full motherboard files now. I had been wanting to try CAD before, but my old laptop was limited to around 8GB RAM and couldn't handle it properly. I already purchased the 32GB set because I got a 17 euro discount for it.

T
tomisnottrash
Member
56
03-09-2023, 02:00 AM
#10
However, you might face restrictions due to the 2133 Jedec speed, and the 5600G memory controller doesn't perform well with four sticks.
T
tomisnottrash
03-09-2023, 02:00 AM #10

However, you might face restrictions due to the 2133 Jedec speed, and the 5600G memory controller doesn't perform well with four sticks.

Pages (2): 1 2 Next