3600MHZ G.SKILL TRIDENT IS NOT ACTIVE

JordiLPS
Junior Member

10-14-2020, 01:55 PM

Hey, I see your build details clearly. You're using a 10900K with an Asus Maximus HERO XII Z490 G.Skill Trident Z CL16 3600MHz motherboard. The issue is that you're not getting the machine to boot at 3600MHz even after adjusting timings and XMP settings. The RAM only boots around 3200MHz. Have you tried checking the BIOS settings for any memory overclocking limits or stability warnings? Also, ensure your CPU cooler is functioning properly and that there are no fan issues affecting boot speed.

JordiLPS

10-14-2020, 01:55 PM #1

xEpicSniiperz
Member

10-14-2020, 05:47 PM

No, the RAM Kit is not listed in the QVL List for that board.

xEpicSniiperz

10-14-2020, 05:47 PM #2

No, the RAM Kit is not listed in the QVL List for that board.

dani2401
Member

226

10-15-2020, 12:40 AM

Which RAM slots are installed? I experienced the same problem with my HyperX 4000 MHz CL19; inserting the second and fourth slots from the CPU resolves the issue.

dani2401

10-15-2020, 12:40 AM #3

Which RAM slots are installed? I experienced the same problem with my HyperX 4000 MHz CL19; inserting the second and fourth slots from the CPU resolves the issue.

Yannickdek
Junior Member

10-16-2020, 11:53 AM

I agree so yes

Yannickdek

10-16-2020, 11:53 AM #4

I agree so yes

Teddy_bear202
Member

180

10-16-2020, 01:01 PM

I have it in sections 1 and 3, possibly needing adjustments.

Teddy_bear202

10-16-2020, 01:01 PM #5

I have it in sections 1 and 3, possibly needing adjustments.

scorps5121
Member

151

10-16-2020, 04:21 PM

You confirmed it should operate at 1.35 volts for 3600 seconds.

scorps5121

10-16-2020, 04:21 PM #6

You confirmed it should operate at 1.35 volts for 3600 seconds.

MineArqueiro
Member

237

10-16-2020, 06:11 PM

Most current motherboards favor 2/4 configuration for dual dimming, though a few lack full 1/3 support for two dimmers. Propose 2/4 and confirm afterward.

MineArqueiro

10-16-2020, 06:11 PM #7

Most current motherboards favor 2/4 configuration for dual dimming, though a few lack full 1/3 support for two dimmers. Propose 2/4 and confirm afterward.

lolito52
Member

103

10-17-2020, 01:27 AM

Work is complete and it's running with the XMP profile now. Thanks!

lolito52

10-17-2020, 01:27 AM #8

Work is complete and it's running with the XMP profile now. Thanks!