F5F Stay Refreshed Hardware Desktop 3600 reaches 95°C on the stock cooler.

3600 reaches 95°C on the stock cooler.

3600 reaches 95°C on the stock cooler.

Pages (2): 1 2 Next
W
Wolfgirl2213
Member
132
08-13-2019, 04:59 PM
#1
I placed an aftermarket component and expect it to arrive in about 1.5 weeks because of the ongoing situation. In hwinfo64, the 3600 shows temperatures reaching 95-96°C during gaming. The side compartment has kept the CPU around 85°C, but I’m worried about potential damage from these high temps. I’ve heard that 7nm chips can be quite sensitive.
W
Wolfgirl2213
08-13-2019, 04:59 PM #1

I placed an aftermarket component and expect it to arrive in about 1.5 weeks because of the ongoing situation. In hwinfo64, the 3600 shows temperatures reaching 95-96°C during gaming. The side compartment has kept the CPU around 85°C, but I’m worried about potential damage from these high temps. I’ve heard that 7nm chips can be quite sensitive.

J
Juan2610
Posting Freak
875
08-13-2019, 06:20 PM
#2
That reeks of a improper mounting. The stock cooler isn't amazing but it's not quite that bad.
J
Juan2610
08-13-2019, 06:20 PM #2

That reeks of a improper mounting. The stock cooler isn't amazing but it's not quite that bad.

D
daco90
Junior Member
3
08-15-2019, 12:58 PM
#3
Check if the applied heat paste is not wet.
D
daco90
08-15-2019, 12:58 PM #3

Check if the applied heat paste is not wet.

K
Koollojoe
Posting Freak
830
08-23-2019, 11:37 AM
#4
I assumed the Ops build is brand new.
K
Koollojoe
08-23-2019, 11:37 AM #4

I assumed the Ops build is brand new.

Z
zSpidey
Junior Member
2
08-30-2019, 09:32 AM
#5
It was included with the paste applied directly, not in a separate tube. Would you say the process caused any harm from heating the chip to 95°C?
Z
zSpidey
08-30-2019, 09:32 AM #5

It was included with the paste applied directly, not in a separate tube. Would you say the process caused any harm from heating the chip to 95°C?

N
NooLele
Posting Freak
847
09-04-2019, 06:37 AM
#6
Unlikely even if it ran for a long time. CPUs tend to slow down or shut down completely before causing harm. I match what FruitBasketSilex said—I think you installed it incorrectly. It could be the thermal paste, but usually that’s an issue with older chips (they’ve been sitting on the shelves for a while).
N
NooLele
09-04-2019, 06:37 AM #6

Unlikely even if it ran for a long time. CPUs tend to slow down or shut down completely before causing harm. I match what FruitBasketSilex said—I think you installed it incorrectly. It could be the thermal paste, but usually that’s an issue with older chips (they’ve been sitting on the shelves for a while).

J
JqBr
Junior Member
6
09-04-2019, 07:20 AM
#7
Technically, the hotter a chip operates, the shorter its lifespan tends to be. However, this doesn't necessarily mean it will fail soon—manufacturers usually build in safety limits and reduce performance to stay within safe temperatures. Temporarily lowering its clock speed could help extend its life. If opening the case significantly impacts performance, it might indicate the need for improved cooling solutions.
J
JqBr
09-04-2019, 07:20 AM #7

Technically, the hotter a chip operates, the shorter its lifespan tends to be. However, this doesn't necessarily mean it will fail soon—manufacturers usually build in safety limits and reduce performance to stay within safe temperatures. Temporarily lowering its clock speed could help extend its life. If opening the case significantly impacts performance, it might indicate the need for improved cooling solutions.

L
LarryOrtega
Junior Member
43
09-12-2019, 12:09 AM
#8
Please share your setup details so I can understand it better.
L
LarryOrtega
09-12-2019, 12:09 AM #8

Please share your setup details so I can understand it better.

D
DanStryder
Junior Member
5
09-14-2019, 07:30 PM
#9
Maybe adjusting the BIOS fan settings could help, especially if it's set to the softest mode. I’m not sure what choices AMD offers for Intel users right now.
D
DanStryder
09-14-2019, 07:30 PM #9

Maybe adjusting the BIOS fan settings could help, especially if it's set to the softest mode. I’m not sure what choices AMD offers for Intel users right now.

S
SeresuteNinja
Junior Member
12
09-15-2019, 04:39 PM
#10
I’d like to retrieve and reconfigure it too. I attempted the stock cooler for my 3600 before the AM4 mount came, and it rarely hit temperatures above the mid-60s during gaming. I cleaned and replaced the gasket with Noctua H1 before installation. The original coolant was still wet and soft. Could you share your case fan configuration?
S
SeresuteNinja
09-15-2019, 04:39 PM #10

I’d like to retrieve and reconfigure it too. I attempted the stock cooler for my 3600 before the AM4 mount came, and it rarely hit temperatures above the mid-60s during gaming. I cleaned and replaced the gasket with Noctua H1 before installation. The original coolant was still wet and soft. Could you share your case fan configuration?

Pages (2): 1 2 Next