3000mhz operation paired with 2400mhz performance on the AsRock Steel Legend B450mm board, using Team 3000mhz RAM.

F5F Stay Refreshed Hardware Desktop 3000mhz operation paired with 2400mhz performance on the AsRock Steel Legend B450mm board, using Team 3000mhz RAM.

Pages (3): 1 2 3 Next

chrisinit1
Member

10-25-2018, 06:51 PM

I purchased the t-force delta rgb 3000mhz RAM, but it continues at 2400mhz. I've already configured the XMP profile. My motherboard is an ASRock B450 Steel Legend. Are there any other steps I should take besides adjusting the XMP settings?

chrisinit1

10-25-2018, 06:51 PM #1

Cuerty123
Member

10-26-2018, 01:34 AM

Biosupgrade? Verify GPU frequency. Possibly the reading was incorrect.

Cuerty123

10-26-2018, 01:34 AM #2

Biosupgrade? Verify GPU frequency. Possibly the reading was incorrect.

Takumi1010
Junior Member

11-02-2018, 01:02 PM

I refreshed the latest BIOS update. Also, I’m not sure how to check RAM speed using Cpuz.

Takumi1010

11-02-2018, 01:02 PM #3

I refreshed the latest BIOS update. Also, I’m not sure how to check RAM speed using Cpuz.

gogofrgl1234
Senior Member

718

11-02-2018, 03:04 PM

Multiple XMP profiles could exist, and the initial one may not be the 3000MHz version.

gogofrgl1234

11-02-2018, 03:04 PM #4

Multiple XMP profiles could exist, and the initial one may not be the 3000MHz version.

chiefjumbo
Member

183

11-02-2018, 04:38 PM

Switch slots, turn off XMP and adjust the frequency manually to verify.

chiefjumbo

11-02-2018, 04:38 PM #5

Switch slots, turn off XMP and adjust the frequency manually to verify.

Bryceconner62
Member

11-02-2018, 07:20 PM

I've explored different options but none worked. I'm unsure about manual settings. Would you like a tutorial video suggestion?

Bryceconner62

11-02-2018, 07:20 PM #6

I've explored different options but none worked. I'm unsure about manual settings. Would you like a tutorial video suggestion?

Fluffy_BananaZ
Member

11-04-2018, 07:54 PM

Turn off XMP and revert to default settings if this kit contains everything you require. For other kits, locate the necessary information.

Fluffy_BananaZ

11-04-2018, 07:54 PM #7

Turn off XMP and revert to default settings if this kit contains everything you require. For other kits, locate the necessary information.

marmonar
Member

11-04-2018, 11:29 PM

You adjust it to XMP mode and move the settings a bit lower (varies by board). You’ll find the manual OC options there. Set the clock speed to 3000 MHz and keep the rest automatic.

marmonar

11-04-2018, 11:29 PM #8

You adjust it to XMP mode and move the settings a bit lower (varies by board). You’ll find the manual OC options there. Set the clock speed to 3000 MHz and keep the rest automatic.

JEFF_JEFFERSON
Senior Member

627

11-05-2018, 12:20 AM

Sure, just focus on the frequency—set it to 3000MHz and let the rest take care of itself. That should cover it. Thanks!

JEFF_JEFFERSON

11-05-2018, 12:20 AM #9

Sure, just focus on the frequency—set it to 3000MHz and let the rest take care of itself. That should cover it. Thanks!

goblinhunte2
Junior Member

11-05-2018, 09:27 AM

#10

Voltage needs to be set at 1.35V, but timing matters for achieving full speed. If XMP provides a profile, use it; otherwise, you'll need to adjust manually unless you have the specific settings.

goblinhunte2

11-05-2018, 09:27 AM #10

Voltage needs to be set at 1.35V, but timing matters for achieving full speed. If XMP provides a profile, use it; otherwise, you'll need to adjust manually unless you have the specific settings.

Pages (3): 1 2 3 Next