24 Pin MOBO board

zoo_mommy
Junior Member

07-26-2016, 02:58 AM

Hello, I’m having trouble getting my PC up. The CPU display is a solid red color. I tried flashing the BIOS to the latest version, but everything seems fine. I double-checked all cables and noticed a picture—does it make sense that there might be a missing contactor? Thanks.

zoo_mommy

07-26-2016, 02:58 AM #1

bouloumator
Junior Member

07-28-2016, 12:35 AM

Your system operates as expected. What comes next?

bouloumator

07-28-2016, 12:35 AM #2

Your system operates as expected. What comes next?

jammintan418
Member

192

07-28-2016, 01:52 AM

X670e steel model 4090 RTX 32 Go 6000 CL 30 featuring a 7800x3D graphics card

jammintan418

07-28-2016, 01:52 AM #3

X670e steel model 4090 RTX 32 Go 6000 CL 30 featuring a 7800x3D graphics card

masterhamann8
Junior Member

07-29-2016, 08:20 AM

I've got VGA connected and the system is running solid red after one minute.

masterhamann8

07-29-2016, 08:20 AM #4

I've got VGA connected and the system is running solid red after one minute.

yrawsome
Member

07-29-2016, 11:08 PM

What's your PSU? Also, 12VHPWR needs careful handling—make sure it’s properly aligned and fully seated, keeping a 35-50mm gap if needed, and follow standard best practices.

yrawsome

07-29-2016, 11:08 PM #5

What's your PSU? Also, 12VHPWR needs careful handling—make sure it’s properly aligned and fully seated, keeping a 35-50mm gap if needed, and follow standard best practices.

Vball44
Junior Member

07-29-2016, 11:24 PM

Your PC is starting properly. For the 12VHPWR to 12VHPWR PSU, it's better to use the cable. For the 12VHPWR to 3×8 Pins PCIE PSU, you should use the appropriate adapter.

Vball44

07-29-2016, 11:24 PM #6

Your PC is starting properly. For the 12VHPWR to 12VHPWR PSU, it's better to use the cable. For the 12VHPWR to 3×8 Pins PCIE PSU, you should use the appropriate adapter.

SergioPW
Member

206

08-01-2016, 07:42 AM

I believe a dedicated 12VHPWR connector makes sense moving forward since it’s approved by PCI-SIG and included in the ATX 3.0 standard. Still, stick with what you have now—don’t waste money on a PSU that doesn’t have this feature.

SergioPW

08-01-2016, 07:42 AM #7