2133MHz on 3200MHz RAM
2133MHz on 3200MHz RAM
as noted, DOCP configurations are found in the AI Tweaker area of the asus bios, which applies the correct RAM settings. in the worst case, you can enter manual values such as 3200mhz with timings 16-18-18-36 and a voltage of 1.35v, leaving the rest to auto timings.
You have five timing options; you can modify the last four. Your current setting is 16:18:18:18:38.
1. Activate DOCP then save and close BIOS
2. Exit BIOS without pressing any keys
3. Wait for the system to boot into Windows and verify the RAM rate again
4. During startup, allow the motherboard to stabilize by turning it on and off a few times; this helps the memory recognize its speed. Interrupting at this point may reset it to default. Have you tried this?
I wouldn't adjust any of these configurations at the moment, particularly if your RAM is originally rated for 3200 MHz. First, verify that XMP is activated in your BIOS. If that doesn't resolve the issue, ensure the latest BIOS version is installed on the motherboard, then restart it after flashing, and re-enable XMP. If problems persist, confirm whether your RAM model is officially compatible with the board. In such cases, consider replacing either the RAM or the motherboard to eliminate further complications and achieve a more reliable setup.