F5F Stay Refreshed Hardware Desktop 2 Dimm units available for selection.

2 Dimm units available for selection.

2 Dimm units available for selection.

S
sifumind
Member
137
08-01-2023, 07:19 PM
#1
You're asking about setting up your new motherboard with two memory slots. The video advice suggests placing RAM in slots that are one slot apart, which means you'd likely use slots 1 and 2 for the 8GB sticks. If you install two 8GB sticks in those slots, it should allow you to access a total of 16GB of memory.
S
sifumind
08-01-2023, 07:19 PM #1

You're asking about setting up your new motherboard with two memory slots. The video advice suggests placing RAM in slots that are one slot apart, which means you'd likely use slots 1 and 2 for the 8GB sticks. If you install two 8GB sticks in those slots, it should allow you to access a total of 16GB of memory.

D
Designx
Member
219
08-03-2023, 11:34 AM
#2
If there are four dimmers, place them in slots two and four; it will still support 16 gigabytes. If the board supports two dimmers, it doesn’t affect the result. If you have four dimmers and you have four adapters, it doesn’t change anything.
D
Designx
08-03-2023, 11:34 AM #2

If there are four dimmers, place them in slots two and four; it will still support 16 gigabytes. If the board supports two dimmers, it doesn’t affect the result. If you have four dimmers and you have four adapters, it doesn’t change anything.

_
_JayRoad_
Junior Member
48
08-03-2023, 06:02 PM
#3
for boards with four slots or more, installing one slot apart is recommended. if your board has two slots, each channel should have two slots. it’s safe to assume one slot per channel. this setup will work fine—just plug it in.
_
_JayRoad_
08-03-2023, 06:02 PM #3

for boards with four slots or more, installing one slot apart is recommended. if your board has two slots, each channel should have two slots. it’s safe to assume one slot per channel. this setup will work fine—just plug it in.