F5F Stay Refreshed Hardware Desktop Z790 Aorus Pro X mit Untervoltage-Optimierung

Z790 Aorus Pro X mit Untervoltage-Optimierung

Z790 Aorus Pro X mit Untervoltage-Optimierung

L
lolotiticarla
Member
54
09-19-2022, 05:59 PM
#1
Hello! I'm preparing to purchase the new Gigabyte Aorus Pro X Z790 motherboard. Right now, I'm using an I9 13900KF on an MSI board with these configurations: CPU Core Voltage at 1.300V, CPU Loadline Calibration Control (LCC) set to level/mode 5 with BCLK locked at 100MHz. In the Aorus Pro X BIOS, I can't locate the LCC option or the 'BCLK 100MHz Lock on' feature. It seems MSI and Gigabyte might use different names for these settings. Could someone guide me through this correctly? Thanks!
L
lolotiticarla
09-19-2022, 05:59 PM #1

Hello! I'm preparing to purchase the new Gigabyte Aorus Pro X Z790 motherboard. Right now, I'm using an I9 13900KF on an MSI board with these configurations: CPU Core Voltage at 1.300V, CPU Loadline Calibration Control (LCC) set to level/mode 5 with BCLK locked at 100MHz. In the Aorus Pro X BIOS, I can't locate the LCC option or the 'BCLK 100MHz Lock on' feature. It seems MSI and Gigabyte might use different names for these settings. Could someone guide me through this correctly? Thanks!

3
3gilad3
Senior Member
735
09-20-2022, 02:33 AM
#2
Nobody ?
3
3gilad3
09-20-2022, 02:33 AM #2

Nobody ?

T
TezahAlpha
Junior Member
14
09-20-2022, 05:23 AM
#3
The motherboard's BIOS interface should closely match the configuration in this Buildzoid video. The BCLK setting appears as the "CPU Base Clock" on the primary Tweaker display, while LLC is listed under Advanced Voltage Settings > CPU/VRM Settings > CPU Vcore Loadline Calibration.
T
TezahAlpha
09-20-2022, 05:23 AM #3

The motherboard's BIOS interface should closely match the configuration in this Buildzoid video. The BCLK setting appears as the "CPU Base Clock" on the primary Tweaker display, while LLC is listed under Advanced Voltage Settings > CPU/VRM Settings > CPU Vcore Loadline Calibration.

F
funniegame1
Member
192
09-22-2022, 04:20 PM
#4
Appreciate the note. Thanks!
F
funniegame1
09-22-2022, 04:20 PM #4

Appreciate the note. Thanks!

D
DoctorOmar
Member
229
09-23-2022, 09:00 AM
#5
The LLC settings in your son's Aorus BIOS should align with those in your MSI BIOS, though terminology may vary. 'Level 5' on MSI typically maps to 'high' on the Aorus. The screenshots you shared likely reflect similar configurations despite different labels.
D
DoctorOmar
09-23-2022, 09:00 AM #5

The LLC settings in your son's Aorus BIOS should align with those in your MSI BIOS, though terminology may vary. 'Level 5' on MSI typically maps to 'high' on the Aorus. The screenshots you shared likely reflect similar configurations despite different labels.

4
4KPixels
Member
53
09-27-2022, 11:55 PM
#6
I think the voltage variations are likely distinct, since MSI and Gigabyte each worked on separate boards. It’s possible they both defaulted to Intel settings, making them similar. They probably match closely, but only a direct comparison would confirm. I’m not sure if someone without both boards could give a definitive answer.
4
4KPixels
09-27-2022, 11:55 PM #6

I think the voltage variations are likely distinct, since MSI and Gigabyte each worked on separate boards. It’s possible they both defaulted to Intel settings, making them similar. They probably match closely, but only a direct comparison would confirm. I’m not sure if someone without both boards could give a definitive answer.