your vcore is exceeding the manual override because it is automatically adjusting beyond your set limits.

F5F Stay Refreshed Power Users Overclocking your vcore is exceeding the manual override because it is automatically adjusting beyond your set limits.

Mispisek
Member

177

11-04-2025, 10:44 PM

adjusted my vcore to 1.380v but it increased to 1.408v. why is this happening? i have it in manual mode, i know it can drop, but i’m confused about why it jumps. what settings in my bios can i change to prevent it from going above 1.30v?

Mispisek

11-04-2025, 10:44 PM #1

_KotoVasa_
Member

197

11-05-2025, 08:49 AM

Did you receive the report from XTU?

_KotoVasa_

11-05-2025, 08:49 AM #2

Did you receive the report from XTU?

SimplyyRaz
Member

202

11-05-2025, 02:31 PM

did you receive that reading from XTU?

SimplyyRaz

11-05-2025, 02:31 PM #3

did you receive that reading from XTU?

Mr_Floobiful
Posting Freak

890

11-08-2025, 06:50 PM

Are you sure your LLC is configured at a high setting? This could lead to voltage overshoot, especially when minimal current flows through the CPU.

Mr_Floobiful

11-08-2025, 06:50 PM #4

Are you sure your LLC is configured at a high setting? This could lead to voltage overshoot, especially when minimal current flows through the CPU.

ItsTimeBomb
Member

119

11-09-2025, 12:14 AM

Supernova1138 :
Are you configuring your LLC to a very high setting? That could lead to voltage overshoot, especially when little current flows through the CPU.
Yeah, I've experimented with various levels. I've chosen to raise my voltage to 1.392 with an LLC level of 5. It seems fine so far—it doesn't spike but does dip slightly to 1.372, which isn't stable for my 5GHz OC. I might try level 6 next.

ItsTimeBomb

11-09-2025, 12:14 AM #5