You might need to check if your RAM slot isn't working properly.
You might need to check if your RAM slot isn't working properly.
Hey there! So you're diving into an older second-hand PC and trying to upgrade its RAM setup. I’ve been through a similar situation with my own system. The original had just 1x8GB of RAM, which was pretty tight. After testing a G.SKILL stick in another machine, I realized the issue might be tied to how the BIOS handles memory slots. It seemed like the first slot only accepted certain configurations, possibly due to BIOS settings or power delivery limitations. You might want to check the BIOS options for compatibility and consider using a different slot if possible. Also, ensure the PSU can handle the load—your setup looks solid with the 400W unit. Let me know what you find!
Are you sure about the slot numbers? The way some motherboard makers name or designate their DIMM slots can be quite confusing. On boards with four slots, the layout is staggered, which adds to the mix-up. QVL might play a role too. More likely, certain boards only allow single-rank versus dual-rank in specific slots—like some boards support single rank for particular configurations but not others.
A misplaced pin can lead to problems such as these. My old Z77 OCF would lose dual channel if a specific pin shifted, but luckily I recognized the loose pin in the socket, making it easy to locate and fix. If any pins aren't in their correct position, this could occur. Make sure to inspect those socket pins closely.
Only two openings are available. The one nearest the CPU won’t display anything and will restart. Still, thank you!
I'll start by cleaning it up. The CPU hasn't been taken out yet because it was originally removed by a system integrator. I'll handle that last step first!
Everyone, this was amazing! I thought I couldn't fix it, but after removing the CPU, I found a tiny bit of lint stuck in the socket. Cleaning it out made everything work perfectly! Thanks for your help!