F5F Stay Refreshed Hardware Desktop You can't use 4000MHz RAM because it exceeds standard compatibility limits.

You can't use 4000MHz RAM because it exceeds standard compatibility limits.

You can't use 4000MHz RAM because it exceeds standard compatibility limits.

Pages (2): Previous 1 2
_
_Gay__Lord_
Member
71
03-27-2018, 10:34 PM
#11
The identifier is HX440C19PB3AK2/16. Please confirm if you require additional details.
_
_Gay__Lord_
03-27-2018, 10:34 PM #11

The identifier is HX440C19PB3AK2/16. Please confirm if you require additional details.

P
Pingoe
Junior Member
3
03-28-2018, 12:26 AM
#12
It seems this setup uses Hynix or Micron memory ICs. For a 4000 MHz clock, the XMP settings should be 19-21-21-42 at 1.35V. It isn’t the ideal kit, but it’s not terrible either. Have you tried turning on XMP so the correct timings apply, yet adjusted the memory multiplier or ratio to DDR4-3400 or 3600?
P
Pingoe
03-28-2018, 12:26 AM #12

It seems this setup uses Hynix or Micron memory ICs. For a 4000 MHz clock, the XMP settings should be 19-21-21-42 at 1.35V. It isn’t the ideal kit, but it’s not terrible either. Have you tried turning on XMP so the correct timings apply, yet adjusted the memory multiplier or ratio to DDR4-3400 or 3600?

S
semanti1
Junior Member
48
03-28-2018, 02:23 AM
#13
S
semanti1
03-28-2018, 02:23 AM #13

L
Lazer18
Member
69
03-28-2018, 03:11 AM
#14
It started working! Hopefully it won't crash, thank you!
L
Lazer18
03-28-2018, 03:11 AM #14

It started working! Hopefully it won't crash, thank you!

J
jvdbreemen
Member
191
03-29-2018, 02:39 AM
#15
He should be able to achieve 4K on a 9900K with proper adjustments, while my 8086K handles it effortlessly.
J
jvdbreemen
03-29-2018, 02:39 AM #15

He should be able to achieve 4K on a 9900K with proper adjustments, while my 8086K handles it effortlessly.

P
Prof_Sprite
Member
110
03-29-2018, 10:57 AM
#16
Use solid boards and good kits with every 8th generation+ CPU. You should be able to run DDR4-4000. The original poster made a few mistakes: they used two different kits (two sets of 2x8), which means you’ll need manual adjustments if you’re not careful. Also, some poor-quality boards or RAM won’t work properly.
P
Prof_Sprite
03-29-2018, 10:57 AM #16

Use solid boards and good kits with every 8th generation+ CPU. You should be able to run DDR4-4000. The original poster made a few mistakes: they used two different kits (two sets of 2x8), which means you’ll need manual adjustments if you’re not careful. Also, some poor-quality boards or RAM won’t work properly.

H
hugog07
Member
107
03-29-2018, 12:19 PM
#17
Likely the problem is that running four dimmers at once is more challenging.
H
hugog07
03-29-2018, 12:19 PM #17

Likely the problem is that running four dimmers at once is more challenging.

F
Fokeiiz
Member
191
03-29-2018, 02:05 PM
#18
Referring to the schedule for kit 19-21-21-42 with Hynix/Micron DRAM ICs isn't ideal. It seems I missed that it was using four sticks across two kits. My stable experience is with DDR4-3600 on an i7-8086K, while you're managing a 32GB configuration of DDR4-3000 CL14 from your i7-6800K and X99 setup.
F
Fokeiiz
03-29-2018, 02:05 PM #18

Referring to the schedule for kit 19-21-21-42 with Hynix/Micron DRAM ICs isn't ideal. It seems I missed that it was using four sticks across two kits. My stable experience is with DDR4-3600 on an i7-8086K, while you're managing a 32GB configuration of DDR4-3000 CL14 from your i7-6800K and X99 setup.

K
Kunall
Member
205
03-29-2018, 04:50 PM
#19
yea but then again, DDR4 came along way. New kits do much better especially f.e. the "F4-4000C15Q-32GVK" or "F4-4000C15Q-32GTZR" G.SKILL kits. Memory Chips got alot better, PCB revisions got much better and i doubt that the IMC is holding anything back below DDR4-4400. Usually the board makes a much bigger difference with RAM OC than you would think. My Asus Maximus Formula f.e. is actually also bad for RAM OC, Overclocking boards are much better (with only 2dimm slots) for obvious reasons... but overall you can guess which kit would run on your board if you f.e. check forums or G.Skills QVL and not the QVL of your Motherboard, because G.Skill advertises their QVL with the actual speed of the ramkit, not only if its working or not at all. And sad but true, Gigabyte Boards are very rarely on any of these lists. Either they dont get tested as often, or they just do not pass the tests.
K
Kunall
03-29-2018, 04:50 PM #19

yea but then again, DDR4 came along way. New kits do much better especially f.e. the "F4-4000C15Q-32GVK" or "F4-4000C15Q-32GTZR" G.SKILL kits. Memory Chips got alot better, PCB revisions got much better and i doubt that the IMC is holding anything back below DDR4-4400. Usually the board makes a much bigger difference with RAM OC than you would think. My Asus Maximus Formula f.e. is actually also bad for RAM OC, Overclocking boards are much better (with only 2dimm slots) for obvious reasons... but overall you can guess which kit would run on your board if you f.e. check forums or G.Skills QVL and not the QVL of your Motherboard, because G.Skill advertises their QVL with the actual speed of the ramkit, not only if its working or not at all. And sad but true, Gigabyte Boards are very rarely on any of these lists. Either they dont get tested as often, or they just do not pass the tests.

Pages (2): Previous 1 2