You can run an Ethernet cable with a stable connection for several months, depending on usage and conditions.
You can run an Ethernet cable with a stable connection for several months, depending on usage and conditions.
I’d choose the Mikrotik Wireless Wire because it operates at 60GHz, allowing up to 200 meters and delivering full gigabit speeds between the homes. You can purchase the 2-device kit for around $165 in the US—just let me know your country so I can locate a local authorized seller with pricing and shipping details.
The setup requires a direct wireless connection instead of long Ethernet cables. These units feature focused antennas, unlike standard omnidirectional ones. The calculations for distance between buildings are crucial—500 meters is significantly farther than 100 meters. For optimal performance, maintain clear line-of-sight; obstacles like trees or poles can disrupt the signal. It’s also vital that both the station and access points face each other, regardless of height differences. When selecting a PtP system, determine the communication frequency. 2.4GHz is suitable for longer ranges and less prone to interference from minor obstructions or rain, though it has speed restrictions. 5GHz offers faster speeds but demands a strong line-of-sight and can be affected by weather. Higher bands such as 60GHz provide even greater bandwidth but come with challenges: higher bandwidth potential, but also more susceptibility to blockages and rain. Be aware that certain regions restrict these frequencies, requiring permits. Devices like Ubiquiti’s NanoBeam or NanoStation are well-suited for outdoor use, offering robust durability, built-in alignment tools, and straightforward setup if you follow instructions. For a 50Mbps link, either 2.4GHz or 5GHz should work. Remember to account for potential losses over distance and interference from nearby Wi-Fi networks. Keep in mind that older equipment, particularly those using 2.4GHz, may be hard to find and often require special sources like eBay. For detailed advice, check the Ubiquiti Community Forums. Additionally, a TP-Link CPE can serve as a PtP solution; while I lack experience with it, a pair costs around $100 and delivers about 300Mbps with dual MIMO, making setup simple in AP or client mode.
Thanks to @Falcon1986 for the tip. The estimated distance is between houses, and if I can’t run the cable through a neighbor’s garden, I’ll need to handle the legal stuff. A 2.4 should work for my speeds. Edited July 26, 2020 by Drama Lama