F5F Stay Refreshed Hardware Desktop Yes, you can use SATA SSDs with your ASUS H81M-K motherboard. Just ensure the SSD is compatible and properly installed.

Yes, you can use SATA SSDs with your ASUS H81M-K motherboard. Just ensure the SSD is compatible and properly installed.

Yes, you can use SATA SSDs with your ASUS H81M-K motherboard. Just ensure the SSD is compatible and properly installed.

Pages (2): 1 2 Next
D
dooodlebip
Junior Member
28
03-27-2016, 06:45 PM
#1
I bought an Asus H81m-k thinking it would work with a 6G SATA SSD and power supply. It kept warning that the BIOS doesn't support booting, no matter what I tried. I've updated the BIOS, changed the slots, adjusted the CPU, even tweaked the settings, but the issue persists. My system details are: Intel core i5 4460 (stock cooler), 8 GB Corsair Vengeance 1600MHZ, and a Warlram Sata SSD with 256GB.
D
dooodlebip
03-27-2016, 06:45 PM #1

I bought an Asus H81m-k thinking it would work with a 6G SATA SSD and power supply. It kept warning that the BIOS doesn't support booting, no matter what I tried. I've updated the BIOS, changed the slots, adjusted the CPU, even tweaked the settings, but the issue persists. My system details are: Intel core i5 4460 (stock cooler), 8 GB Corsair Vengeance 1600MHZ, and a Warlram Sata SSD with 256GB.

K
60
03-27-2016, 09:57 PM
#2
What specific issue are you encountering? Does your system have an operating system already set up?
K
KFC_GoldenPlay
03-27-2016, 09:57 PM #2

What specific issue are you encountering? Does your system have an operating system already set up?

P
130
03-29-2016, 10:16 AM
#3
It mentions this during the initial setup phase of the boot process. You asked if it was mentioned when you tried installing an operating system on the drive.
P
Peace_and_Hope
03-29-2016, 10:16 AM #3

It mentions this during the initial setup phase of the boot process. You asked if it was mentioned when you tried installing an operating system on the drive.

F
frsandstone77
Member
112
03-29-2016, 11:08 AM
#4
It seems they might be using an IDE setup that's attempting to operate in AHCI mode or a similar configuration.
F
frsandstone77
03-29-2016, 11:08 AM #4

It seems they might be using an IDE setup that's attempting to operate in AHCI mode or a similar configuration.

Y
YanGamingIL7
Junior Member
32
03-30-2016, 08:35 AM
#5
Shifted to Troubleshooting area
Y
YanGamingIL7
03-30-2016, 08:35 AM #5

Shifted to Troubleshooting area

N
117
03-30-2016, 09:03 AM
#6
Purchasing inexpensive SATA SSDs from unknown manufacturers is generally not advisable. It’s likely you’re dealing with a defective or outdated drive.
N
NotLate4Dinner
03-30-2016, 09:03 AM #6

Purchasing inexpensive SATA SSDs from unknown manufacturers is generally not advisable. It’s likely you’re dealing with a defective or outdated drive.

J
Jadee05
Junior Member
19
03-30-2016, 03:28 PM
#7
It could be an OS already set up on another device or one they used before a BIOS restart, but I'm not sure.
J
Jadee05
03-30-2016, 03:28 PM #7

It could be an OS already set up on another device or one they used before a BIOS restart, but I'm not sure.

S
StreetHobo
Senior Member
568
04-13-2016, 02:30 AM
#8
I don't see much reason to worry. Kingston SSDs without the DRAM cache are now very affordable these days. Lower-end brands struggle to match quality if they produce unreliable products. If you're looking for a budget SSD, go for an A400—just keep in mind it lacks a DRAM cache. I use them every day and feel confident about their performance.
S
StreetHobo
04-13-2016, 02:30 AM #8

I don't see much reason to worry. Kingston SSDs without the DRAM cache are now very affordable these days. Lower-end brands struggle to match quality if they produce unreliable products. If you're looking for a budget SSD, go for an A400—just keep in mind it lacks a DRAM cache. I use them every day and feel confident about their performance.

B
bobfree6
Junior Member
40
04-15-2016, 01:29 AM
#9
It might stem from a past legacy setup versus UEFI.
B
bobfree6
04-15-2016, 01:29 AM #9

It might stem from a past legacy setup versus UEFI.

D
DeadVisual
Member
62
04-16-2016, 03:31 AM
#10
Download the SATA/AHCI/Raid drivers, extract them into a folder on your USB drive. During installation, choose "Load driver" and locate the extracted folder on the USB. Tick the "include" option and click OK. Your SSD should appear. Pick it and install; if there are partitions, delete them so Windows creates new ones automatically. Note: I suggest enabling UEFI and booting from BIOS during Windows installation.
D
DeadVisual
04-16-2016, 03:31 AM #10

Download the SATA/AHCI/Raid drivers, extract them into a folder on your USB drive. During installation, choose "Load driver" and locate the extracted folder on the USB. Tick the "include" option and click OK. Your SSD should appear. Pick it and install; if there are partitions, delete them so Windows creates new ones automatically. Note: I suggest enabling UEFI and booting from BIOS during Windows installation.

Pages (2): 1 2 Next