Yes, it supports the native version.
Yes, it supports the native version.
I mistakenly purchased an ASUS PRIME Z490-A with an i5-11600kf. Because the board lacks BIOS flashback capabilities and I don’t have an older 10th-gen chip, I opted for the Z590 version instead of trying to update the BIOS. Before spending more, confirm that the Z590 chipset supports your 11600kf natively without any BIOS changes.
Have you purchased this yet and experienced the issue? I’m facing a boot problem with Z590 and 11600KF. The motherboard believes there’s no graphics support, even after trying various cards. It seems the BIOS might be defaulting to an iGPU, so you may need a non-F series board before setting it up.
I resolved the issue. I recommend removing the KF and using only the K version. If not, you might need a donor chip to reach the BIOS. For the Gigabyte Z590 UD AC and Gaming X models, to support GFX cards you must turn on CSM in the BIOS settings. However, accessing the BIOS will disable your graphics cards, causing a beep pattern and failure on the VGA light. No worries, you can still use the built-in graphics. But the KF model lacks an onboard graphics solution. Catch 22. You’ll need a chip with its own integrated GPU and ensure no graphics cards are installed on the motherboard. If they are, you’ll hear the 5 beeps. If not, you can enter the BIOS. There, enable CSM and your graphics should function again. Unfortunately, resetting or upgrading the BIOS may reset CSM, forcing you through a full process of removing the graphics card, installing an iGPU CPU, re-entering BIOS and turning CSM back on. It’s surprising how a simple default setting can cause such complications. Wish the manufacturers would test these situations and provide a solution. They could detect F-series chips and automatically switch CSM to enabled.