XMP issue leading to failure to boot. 3600 CL14 Trident Neo detected.

F5F Stay Refreshed Hardware Desktop XMP issue leading to failure to boot. 3600 CL14 Trident Neo detected.

DankestMemerJP
Junior Member

11-28-2020, 05:15 PM

I observed that when I turn on XMP, the system fails to boot and displays error code 07. I need to resolve this and allow XMP to work smoothly. RTX 3080 Suprim XMSI X570 Unify 5900X DDR4-3600 CL14 32GB H150I Capellix Elite 850W Seasonic Focus Plus

DankestMemerJP

11-28-2020, 05:15 PM #1

wpbvjccc
Member

126

12-02-2020, 08:11 PM

Shut it down completely. The only fix is to turn it off. XMP creates more problems than it resolves.

wpbvjccc

12-02-2020, 08:11 PM #2

Shut it down completely. The only fix is to turn it off. XMP creates more problems than it resolves.

twey64
Junior Member

12-04-2020, 09:29 AM

It functioned properly before; I switched to gaming mode in Ryzen Master, which triggered the error code 07. After returning to the default setting, the issue persisted.

twey64

12-04-2020, 09:29 AM #3

It functioned properly before; I switched to gaming mode in Ryzen Master, which triggered the error code 07. After returning to the default setting, the issue persisted.

jejesko
Member

12-05-2020, 03:32 PM

I would exchange the RAM and receive a package tailored for Ryzen or available in the QVL. If you wish to retain the RAM, it may offer a second DOCP (XMP for Ryzen) preset to test. You might also adjust the secondary timings. For CL 16 configurations, you can extend up to 18. Additionally, consider the recommended secondary timings from the Ryzen DRam calculator.

jejesko

12-05-2020, 03:32 PM #4

redstonersven
Member

210

12-08-2020, 07:27 AM

Currently equipped with QVL RAM. https://www.gskill.com/product/165/326/1...B-Overview It also incorporates a Samsung B-die

redstonersven

12-08-2020, 07:27 AM #5

Currently equipped with QVL RAM. https://www.gskill.com/product/165/326/1...B-Overview It also incorporates a Samsung B-die

PitufoGreen
Member

109

12-11-2020, 01:51 PM

You can start by removing the CMOS and then verify the RAM using tools such as memtest86.

PitufoGreen

12-11-2020, 01:51 PM #6

You can start by removing the CMOS and then verify the RAM using tools such as memtest86.