F5F Stay Refreshed Hardware Desktop XMP BIOS remains inactive during profile selection among three options

XMP BIOS remains inactive during profile selection among three options

XMP BIOS remains inactive during profile selection among three options

E
eskzz
Posting Freak
909
11-11-2022, 08:34 AM
#1
The system runs Windows 11 Pro with a 12th gen i9-12900K processor. It has two Nvidia 3090ti GPUs and a Kingston memory module. BIOS version E7D26IMS.180 is installed. When using XMP profiles, saving and booting causes the BIOS to freeze. After contacting Kingston, they confirmed it’s available in QVL, so it should function. Memory slots appear correctly paired. Uncertainty remains about whether Windows 11 is interfering with the new settings—any suggestions?
E
eskzz
11-11-2022, 08:34 AM #1

The system runs Windows 11 Pro with a 12th gen i9-12900K processor. It has two Nvidia 3090ti GPUs and a Kingston memory module. BIOS version E7D26IMS.180 is installed. When using XMP profiles, saving and booting causes the BIOS to freeze. After contacting Kingston, they confirmed it’s available in QVL, so it should function. Memory slots appear correctly paired. Uncertainty remains about whether Windows 11 is interfering with the new settings—any suggestions?

H
HubixCube
Member
166
11-11-2022, 08:49 AM
#2
It's reverting to the standard speed by default. The XMP files are just predefined OC settings, so they might not function as expected. You might have to adjust the speed and timing manually for stability.
H
HubixCube
11-11-2022, 08:49 AM #2

It's reverting to the standard speed by default. The XMP files are just predefined OC settings, so they might not function as expected. You might have to adjust the speed and timing manually for stability.

C
CuteAvenger
Junior Member
31
11-11-2022, 03:10 PM
#3
The signals indicate a persistent failure to boot. Please verify with @Rudraid for confirmation or details on the issue.
C
CuteAvenger
11-11-2022, 03:10 PM #3

The signals indicate a persistent failure to boot. Please verify with @Rudraid for confirmation or details on the issue.

D
Darst04
Member
56
11-11-2022, 04:59 PM
#4
Preparing to attempt it now... they are presets... appreciate the feedback.
D
Darst04
11-11-2022, 04:59 PM #4

Preparing to attempt it now... they are presets... appreciate the feedback.

D
Descath
Junior Member
42
11-11-2022, 06:15 PM
#5
1 of the memory sticks are bad. Trying to get Kingston to respond to get a replacement. Turns out this mb doesn't have any validations for 4 dimm's of 32. This memory has been validated for 2 sticks of 32. This memory start with 4800MHz, but won't overclock till I use XMP profile 3, 4800MHHz 1st, reboot come back change to profile 1, 5600MHz. I do not understand after windows load with profile 1 5600MHz, Speccy or CPUID shows 0 Modules ... I included 1 pic without the overclock MSI must know there is a problem, why would they validate a set of 2 sticks but not 4 on any quads of 32. not 1 brand. Sorry for my Grammar Edited September 17, 2022 by Rudraid
D
Descath
11-11-2022, 06:15 PM #5

1 of the memory sticks are bad. Trying to get Kingston to respond to get a replacement. Turns out this mb doesn't have any validations for 4 dimm's of 32. This memory has been validated for 2 sticks of 32. This memory start with 4800MHz, but won't overclock till I use XMP profile 3, 4800MHHz 1st, reboot come back change to profile 1, 5600MHz. I do not understand after windows load with profile 1 5600MHz, Speccy or CPUID shows 0 Modules ... I included 1 pic without the overclock MSI must know there is a problem, why would they validate a set of 2 sticks but not 4 on any quads of 32. not 1 brand. Sorry for my Grammar Edited September 17, 2022 by Rudraid