F5F Stay Refreshed Hardware Desktop Windows fails to start when XMP is activated.

Windows fails to start when XMP is activated.

Windows fails to start when XMP is activated.

J
jxzuzuzo
Posting Freak
Find
750
10-18-2019, 11:05 PM
#1
I own a gigabyte z370md3h and i58600k. My RAM is gskill trizent z rgb3600. Everything was working properly. RAM was handling 3600 on XMP until last night when I needed to rearrange the cable management inside the case. The BIOS rebooted itself, but now every time I turn on XMP Windows it doesn’t boot. It shows a load failed or similar error. I removed the wires behind the motherboard and connected them normally again, but the issue persists. XMP just isn’t functioning. Please help.
Reply
Reply
J
jxzuzuzo
10-18-2019, 11:05 PM #1

I own a gigabyte z370md3h and i58600k. My RAM is gskill trizent z rgb3600. Everything was working properly. RAM was handling 3600 on XMP until last night when I needed to rearrange the cable management inside the case. The BIOS rebooted itself, but now every time I turn on XMP Windows it doesn’t boot. It shows a load failed or similar error. I removed the wires behind the motherboard and connected them normally again, but the issue persists. XMP just isn’t functioning. Please help.

Reply
Reply
C
CurlyFry0929
Junior Member
Find
32
10-19-2019, 09:57 PM
#2
Adjust the storage locations, reinitialize the system, refresh the BIOS.
Reply
Reply
C
CurlyFry0929
10-19-2019, 09:57 PM #2

Adjust the storage locations, reinitialize the system, refresh the BIOS.

Reply
Reply
D
dimin69
Junior Member
Find
22
10-27-2019, 04:12 PM
#3
After resetting the BIOS, the PC operates normally. However, enabling XMP causes a boot failure.
Reply
Reply
D
dimin69
10-27-2019, 04:12 PM #3

After resetting the BIOS, the PC operates normally. However, enabling XMP causes a boot failure.

Reply
Reply