Windows 10 installation issues...

Icy2
Junior Member

06-14-2016, 11:00 PM

Hi, hardware: you're using an MSI laptop GE73 8RF with USB booting. The installation image is from Microsoft and previously worked on another PC. The issue started after deleting all partitions—one M.2 SSD and one HDD were left. You selected the SSD for installation and everything seemed fine so far. Now you're encountering strange behavior: files copy, ticks appear in a second, then files are ready to install. Installation takes about 2 minutes, updates take 1 second, and it boots into the same installer where you choose time and date. After trying again, something gets installed as shown in the pictures. You've cleared everything and retried, but it keeps looping. Any suggestions?

Icy2

06-14-2016, 11:00 PM #1

Dorito977
Member

177

06-20-2016, 03:43 PM

Check the installation source. Are you using a USB 3.0 drive? The quick boot times suggest the media might be damaged or corrupted.

Dorito977

06-20-2016, 03:43 PM #2

Check the installation source. Are you using a USB 3.0 drive? The quick boot times suggest the media might be damaged or corrupted.

Cupcake_Rose
Posting Freak

844

07-06-2016, 05:32 PM

You're asking about adjusting the boot sequence. You placed the USB first so it boots, then selected the SSD for installation. Please review the images and let me know if you need further clarification.

Cupcake_Rose

07-06-2016, 05:32 PM #3

malouou
Junior Member

07-07-2016, 12:14 AM

Ensure SSD is set as the first choice during automatic startup in the BIOS settings. Each manufacturer's configuration varies, so you may need to adjust accordingly.

malouou

07-07-2016, 12:14 AM #4

Ensure SSD is set as the first choice during automatic startup in the BIOS settings. Each manufacturer's configuration varies, so you may need to adjust accordingly.

sCx_Batman
Member

163

07-07-2016, 02:07 AM

pictures.

sCx_Batman

07-07-2016, 02:07 AM #5

pictures.

RitaGayo
Member

07-07-2016, 09:49 AM

Access BIOS settings and adjust the hard drive order to position it as the first drive.

RitaGayo

07-07-2016, 09:49 AM #6

Access BIOS settings and adjust the hard drive order to position it as the first drive.

itz_Jesper2016
Member

183

07-07-2016, 04:38 PM

It seems you're asking about the installation location of Windows. Would you like to know where it's typically installed on a computer?

itz_Jesper2016

07-07-2016, 04:38 PM #7

It seems you're asking about the installation location of Windows. Would you like to know where it's typically installed on a computer?

nerdboy9
Junior Member

07-13-2016, 01:02 AM

It verifies each component before starting up. You might want to remove the USB port and test again.

nerdboy9

07-13-2016, 01:02 AM #8

It verifies each component before starting up. You might want to remove the USB port and test again.

_alejandro27_
Junior Member

07-14-2016, 01:54 AM

It performed similarly and I began to feel frustrated, but once it restarted it kept installing! Thanks! Also appreciated the details on booting in general.

_alejandro27_

07-14-2016, 01:54 AM #9

It performed similarly and I began to feel frustrated, but once it restarted it kept installing! Thanks! Also appreciated the details on booting in general.