Windows 10 fails to transmit a signal during startup from an SSD, yet functions perfectly with an HDD.
Windows 10 fails to transmit a signal during startup from an SSD, yet functions perfectly with an HDD.
If I boot from SSD system it works, but no monitor signal appears.
When using Windows SSD instance with HDD as boot device, everything loads normally.
The issue began after installing Windows on the SSD; after setting it as primary boot, no display signal appeared despite background operation.
Eventually realized a dual-boot setup after giving up. Tried an integrated card but same result.
It began when I aimed to set up Windows on my new SSD. Removed the old Windows installation from the HDD, completed the setup on the SSD, but immediately after, I switched the SSD to primary boot device.
When I need to reinstall the OS onto an SSD while the current OS is running on an HDD, I typically back up all essential data from the HDD, format the partition with the OS and necessary partitions using a bootable USB drive, disconnect the HDD from the system, and then install the OS with only the SSD connected.
Did you remove the hidden partitions on the hard drive or only the visible partition with Drive C:? Not removing all partitions might cause boot issues after installing the new operating system.
When upgrading a computer or laptop from a hard disk to an SSD, I maintain the OS on the hard disk and directly clone it onto the new SSD. Once cloning is finished, I disconnect the hard disk's SATA cables and start from the SSD. Warning: Avoid connecting the old drive again when first booting from the newly cloned drive.
https://www.macrium.com/reflectfree
The entire procedure typically lasts under an hour, resulting in Windows installed on the faster SSD while keeping your programs and data on the original hard disk. You can later reinstall the hard disk into the computer as a backup in case the SSD fails.
Have you disconnected the hard disk before installing Windows 10 on the SSD? It's a good idea to turn off all other drives before installing an OS to prevent confusion and accidental data loss.
When you say "dual boot," do you mean having two versions of Windows 10 running simultaneously on the same drive? It’s more typical to have Linux alongside Windows on one disk if you want to dual boot.
I own an outdated system with Windows XP and Windows 98 installed on the same hard disk (in separate partitions), meaning I can switch between Windows 98 and XP from the same drive.