WiFi card slot for M.2 SSD (B450M DS3H V2, version 1.x)
WiFi card slot for M.2 SSD (B450M DS3H V2, version 1.x)
Hello! I’m curious about your M.2 connection. The card became extremely hot, possibly causing damage or overheating protection to kick in. Here’s what I understand: 1. Is the M.2 slot functioning properly since you’re not using any storage? 2. Why did the network card overheat so much and develop burn marks on its contacts?
The M.2 slot is intended solely for an SSD, not for network cards or other components. Remember this next time when assembling your setup. Stay safe and good luck!
Slots and devices vary; each is "keyed" to match specific designs. A Wi-Fi card requires "Key E," whereas your motherboard has a "Key M" port, meaning the card wouldn't fit naturally. This suggests the card was inserted incorrectly. Although I don’t have the pin configuration, it’s likely a short circuit happened—causing overheating and burn marks. I can’t confirm if the slot remains functional, but protection mechanisms might have activated, possibly damaging the slot itself.
It's interesting they worked together, but compatibility isn't guaranteed. Your question about securing the card is understandable—those screw holes might not align properly.