Why does my HP's performance sound excessive after CPU overclocking?
Why does my HP's performance sound excessive after CPU overclocking?
After increasing the overclock of my I7 9700K to 5ghz, my HP Reverb began overheating. I only adjusted the CPU and RAM, leaving the GPU unchanged, which is a 2080ti. Does this make sense?
It really aligns with what you expect. A significant boost in overclocking leads to a sharp rise in power consumption, with every watt generated needing to be dissipated. The CPU will draw more than 200 watts, potentially reaching around 250 watts under full load. You'll need robust cooling solutions to manage the heat effectively.
It really aligns perfectly. Overclocking causes a significant rise in power consumption, with every watt generated needing to be dissipated. The CPU will draw more than 200 watts, potentially reaching around 250 watts under full load, which demands robust cooling solutions. It’s completely logical—your efforts are being converted into heat that must be managed.
It really does make sense. Your efforts to apply a lot of power mean the heat needs to be directed elsewhere.
Thanks. Sometimes I need to revisit and adjust, but this one was fairly straightforward. It seems the original poster has limited experience and wasn’t prepared for the overclock outcomes. A good next step would be to check the cooling solution used and the temperatures during load. Likely the current setup isn’t sufficient for the overclock—either an upgrade is needed or the overclock settings should be reduced.
240mm watercooling is the bare minimum, while a 360mm model would be better.