Which router
Which router
Learn about the difference between a $50 and a $500 router. One antenna versus 27. Considering my setup at Local Grange Hall—log building with 12" logs, fiber connection, and the bfcommunityclub dot org site—I need high speed fiber with a converter. The room is 35x70 feet, and I’ll be using it for several devices: up to a dozen cellphones, a video call for scouts, and streaming a wedding to my grandmother in Florida. About 90% of the time it will be idle.
I’m planning to add two RJ45 jacks next to the projector and need an external pavilion with WiFi coverage 150 feet south of the hall. This is for tomorrow but should be considered.
I require a router that supports over 1 gigabit, handles one WAN connection, and four LANs. Where can I find a comparison table showing why a $350 model is significantly cheaper than a $50 one?
Not really. The optimal solution is to purchase a quality AC router (around $150 for an R7000 or similar) and a few access points, including one connected to an underground cable to the pavilion when feasible. Because the building is longer by double, position the router near one end (such as the 1/4 point) and an access point (or a budget router set up as an AP like THIS) at the 3/4 point. The pavilion will require its own access point that is farther away. The exact advice depends on whether you can obtain a cable to it and if it is weather-resistant.
Not really. The optimal solution is to purchase a quality AC router (around $150 for an R7000 or similar) and a few access points, including one connected to an underground cable to the pavilion when feasible. Because the building is longer by double the length, position the router near one end—such as the 1/4 point—and place an access point (or set up a budget router as an AP like THIS) at the 3/4 point. The pavilion will require its own access point located further away. The exact advice varies based on cable availability and weather resistance requirements.