F5F Stay Refreshed Hardware Desktop Where is QDR RAM?

Where is QDR RAM?

Where is QDR RAM?

S
stephanie2005
Member
233
07-06-2023, 12:12 PM
#1
You're curious about QDR RAM—new tech that promises faster access times. It's still emerging, not widely available yet, and developers are working through challenges before it becomes mainstream.
S
stephanie2005
07-06-2023, 12:12 PM #1

You're curious about QDR RAM—new tech that promises faster access times. It's still emerging, not widely available yet, and developers are working through challenges before it becomes mainstream.

I
i3z___
Senior Member
559
07-07-2023, 06:21 AM
#2
The information pertains to a niche use case with high cost and technical complexity.
I
i3z___
07-07-2023, 06:21 AM #2

The information pertains to a niche use case with high cost and technical complexity.

T
TobiasDogGamer
Junior Member
11
07-12-2023, 10:41 AM
#3
The information you're asking about doesn't directly relate to the Wiki Quad data rate. It seems you might be conflating different concepts. Let me know if you'd like clarification!
T
TobiasDogGamer
07-12-2023, 10:41 AM #3

The information you're asking about doesn't directly relate to the Wiki Quad data rate. It seems you might be conflating different concepts. Let me know if you'd like clarification!

S
silvertooth98
Member
181
07-13-2023, 04:16 PM
#4
GDDR5 and its successors can be considered a type of QDR memory. The actual transfer rate of GDDR5 is four times the real speed, meaning a 1750 MT/s module would effectively move at 7000 MT/s. In contrast, standard DDR achieves roughly double its actual speed—like 2666 MT/s becoming about 5333 MT/s. Applying this logic to your GTX 960, the calculation shows an effective throughput of around 112 GB/s versus approximately 25.6 GB/s for DDR3.
S
silvertooth98
07-13-2023, 04:16 PM #4

GDDR5 and its successors can be considered a type of QDR memory. The actual transfer rate of GDDR5 is four times the real speed, meaning a 1750 MT/s module would effectively move at 7000 MT/s. In contrast, standard DDR achieves roughly double its actual speed—like 2666 MT/s becoming about 5333 MT/s. Applying this logic to your GTX 960, the calculation shows an effective throughput of around 112 GB/s versus approximately 25.6 GB/s for DDR3.

T
tommie124
Member
199
07-17-2023, 07:11 AM
#5
DDR2 follows QDR and DDR (1). Some sources mention P4 can handle QDR.
T
tommie124
07-17-2023, 07:11 AM #5

DDR2 follows QDR and DDR (1). Some sources mention P4 can handle QDR.

X
215
07-23-2023, 07:44 PM
#6
According to what I understand, no QDR was employed for the system memory in a P4 PC or any other consumer PC. It used SDR, RDRAM with high-speed operation that produced significant heat, and original DDR in later versions. I believe DDR2 existed just before Conroe was introduced.
X
xXCoolIceBoyXx
07-23-2023, 07:44 PM #6

According to what I understand, no QDR was employed for the system memory in a P4 PC or any other consumer PC. It used SDR, RDRAM with high-speed operation that produced significant heat, and original DDR in later versions. I believe DDR2 existed just before Conroe was introduced.

N
nicolasman2
Junior Member
46
07-24-2023, 07:30 AM
#7
The P4 uses a quad Front Side Bus design. Two strobes operate at 266 MHz, which equals 533 MHz memory frequency. One strobe runs at 133 MHz. Therefore, four strobes together would produce 533 MHz, but data transmission would actually occur at 266 MHz.
N
nicolasman2
07-24-2023, 07:30 AM #7

The P4 uses a quad Front Side Bus design. Two strobes operate at 266 MHz, which equals 533 MHz memory frequency. One strobe runs at 133 MHz. Therefore, four strobes together would produce 533 MHz, but data transmission would actually occur at 266 MHz.