F5F Stay Refreshed Hardware Desktop When running cyberpunk or intense games, keep the GPU fans quiet and turn off the screen for better performance.

When running cyberpunk or intense games, keep the GPU fans quiet and turn off the screen for better performance.

When running cyberpunk or intense games, keep the GPU fans quiet and turn off the screen for better performance.

T
TimeGod9870
Junior Member
19
08-19-2020, 06:36 PM
#1
Details: b450 aorus elite Tuf Rtx 3080 Oc R7 3700x Rog 850w 80plus gold Corsair vengeance lpx 3200mhz 16gbx2. Runs at 3133mhz, but the PC won’t even boot at full speed. The issue started yesterday while playing Cyberpunk Great—no problems then. Now, once I start the mouse or move the cursor, the fans get loud and the screen shuts down. This happens in many games like FIFA, F1, Phasmophobia, Fortnite, Warzone, etc. I’ve tried different PSU cables and GPU cables already. Any advice?
T
TimeGod9870
08-19-2020, 06:36 PM #1

Details: b450 aorus elite Tuf Rtx 3080 Oc R7 3700x Rog 850w 80plus gold Corsair vengeance lpx 3200mhz 16gbx2. Runs at 3133mhz, but the PC won’t even boot at full speed. The issue started yesterday while playing Cyberpunk Great—no problems then. Now, once I start the mouse or move the cursor, the fans get loud and the screen shuts down. This happens in many games like FIFA, F1, Phasmophobia, Fortnite, Warzone, etc. I’ve tried different PSU cables and GPU cables already. Any advice?

H
HolyScythe999
Member
68
08-19-2020, 06:51 PM
#2
Check if disabling xmp resolves the problem and observe any changes. Keep an eye on the GPU temperatures during these tests; they might indicate overheating or another issue.
H
HolyScythe999
08-19-2020, 06:51 PM #2

Check if disabling xmp resolves the problem and observe any changes. Keep an eye on the GPU temperatures during these tests; they might indicate overheating or another issue.

S
SamosaMan169
Junior Member
45
08-20-2020, 07:22 AM
#3
It's consistently set to 3000mhz, and I recall everything functioning normally at that speed. Cyberpunk still crashed, though the GPU temperatures stayed above 70-80 during play without spiking further.
S
SamosaMan169
08-20-2020, 07:22 AM #3

It's consistently set to 3000mhz, and I recall everything functioning normally at that speed. Cyberpunk still crashed, though the GPU temperatures stayed above 70-80 during play without spiking further.

T
TardisJunkie
Junior Member
11
08-22-2020, 09:21 AM
#4
Remove all debris from the PC interior, focusing on the GPU fan area. Ensure the BIOS is updated to the most recent version via the provided link.
T
TardisJunkie
08-22-2020, 09:21 AM #4

Remove all debris from the PC interior, focusing on the GPU fan area. Ensure the BIOS is updated to the most recent version via the provided link.

K
kaaskotskikker
Posting Freak
795
08-22-2020, 04:29 PM
#5
Unfortunately this is a very common problem, and its no surprise you're seeing on an older card like that. Obviously DDU, normal first step for any GPU issues so just get it out of the way. Typically though, GPU fans to 100% and screens going black are signs of the card failing in some way and it going into a protection mode to save itself. Has the card been opened to re-paste and pad? Its about that time in its life.
K
kaaskotskikker
08-22-2020, 04:29 PM #5

Unfortunately this is a very common problem, and its no surprise you're seeing on an older card like that. Obviously DDU, normal first step for any GPU issues so just get it out of the way. Typically though, GPU fans to 100% and screens going black are signs of the card failing in some way and it going into a protection mode to save itself. Has the card been opened to re-paste and pad? Its about that time in its life.

P
PastelLlama
Junior Member
23
08-22-2020, 06:10 PM
#6
Previous attempts were unsuccessful.
P
PastelLlama
08-22-2020, 06:10 PM #6

Previous attempts were unsuccessful.

P
Pongolito85
Member
167
08-22-2020, 11:31 PM
#7
Have you tried it before? There’s no guarantee it won’t go wrong, and I’m worried about making mistakes.
P
Pongolito85
08-22-2020, 11:31 PM #7

Have you tried it before? There’s no guarantee it won’t go wrong, and I’m worried about making mistakes.

R
Rayack
Senior Member
539
08-23-2020, 01:31 AM
#8
If you manage to obtain a fresh pair of RAM, I’d consider it to confirm it’s not an issue.
R
Rayack
08-23-2020, 01:31 AM #8

If you manage to obtain a fresh pair of RAM, I’d consider it to confirm it’s not an issue.