What type of cable is required to charge the Anker 737 power bank?
What type of cable is required to charge the Anker 737 power bank?
I recently purchased the Anker 737 power bank and noticed it arrived with less than 20% battery capacity. I’m required to recharge it, but the package only includes a single cable. This isn’t the standard setup – the cable isn’t designed for plugging into an outlet to charge fully. I’m unsure how to connect it properly to a wall socket to reach 100%. I’ve seen suggestions about using a PD USB-C charger or a magnetic charging adapter, but neither is available. I’m considering buying another cable or power adapter to complete the setup. Could I utilize my Apple 20W USB-C adapter with an iPhone 13 mini? Also, I have an older 5W USB wall charger that still works with my iPhone SE. Would a 20W adapter be suitable for it? I’m surprised to learn that this Anker model doesn’t come with a charger meant for outlet use. It seems odd that online guides recommend PD USB-C chargers or similar devices, yet they require additional purchases. My Dell XPS 15 9520 laptop supports USB-C charging, and its charger is rated at 130W – would that work? I’m also checking if the Dell charger restricts power delivery above 100W for non-Dell devices. Regarding the Anker 737, I wonder if it can be charged using my existing Dell XPS 15 9520 USB-C adapter. What about other devices? How should I approach charging an iPhone 13 mini or an older iPhone SE with this setup?
Yes, though it will be slower compared to a true USB-PD charger. Yes, but it may try to reduce power output below 130W (the maximum for PD 2.0; Dell had some tricks up its sleeve). Using a USB to Lightning cable?
I understand it may take some time to fully charge the Anker 737 using the Apple 20W USB-C Power Adapter. If you compare it to a genuine USB-PD charger, these usually deliver between 65W and 140W. On average, a 100W USB-PD charger should charge the Anker 737 significantly faster than the 20W adapter. You mentioned a 100W would take about five times longer than the 20W adapter—so roughly an hour for the 20W and around five hours for the 100W. That seems reasonable.
If you use a standard USB-C wall charger with a power rating of 5W, charging the Anker 737 would be very slow. For example, if it takes five hours with the 20W adapter, the 5W charger might take around twenty hours. This could be acceptable depending on your needs, but it’s definitely slower than a proper USB-PD setup.
Regarding safety, using higher wattage adapters can increase risk if not handled properly. Always ensure the adapter matches the device's requirements and is used correctly. With older iPhones like the iPhone SE, the 5W adapter should be fine as long as you follow the instructions.
When connecting devices, you can use either the original charging cable or a compatible one, but make sure it supports USB-PD if possible. The Anker 737 is designed to work with USB-PD chargers, so using a higher wattage adapter won’t cause immediate issues—just be mindful of the total power draw and safety guidelines.
I’m sorry if this was unclear. Just remember, a battery works best with the right charger, and you can use it to power your gadgets.
That works out logically. It's similar to purchasing an iPhone with only a charging cable, prompting you to buy a compatible charger like the Apple 20W. With your three chargers, using the Dell XPS 15 9520 USB-C adapter makes sense because it matches its 130W capacity. While Dell chargers are proprietary, they’re designed to work efficiently. This setup could be significantly faster—potentially five times quicker than a 20W Apple charger and much faster than a 5W wall charger. There’s no risk involved if you use the Dell charger with your devices.
The post seems to suggest the anker 737 provides a charger for the outlet, but it's unclear if this matches your original statement. Please clarify for confirmation.
Yes, you can use either the Dell XPS 15 9520 USB-C 130-watt charging cable or the Apple 20W USB-C adapter.
I see your hesitation about using charging ports. The details you need are available directly on Anker's site. TL;DR: Connect the Anker 737 to any USB-C charger you own, preferably the Dell model for speed. Stick with the cables you’ve used before—it’s the simplest solution. Your device will indicate how it charges. For instance, the 2-page manual notes input and output info, so check it out. The 1 Input port labeled in the image shows wattage; higher numbers mean faster charging. You can test different USB-C cables to see which works best—some handle both data and power efficiently, while others may lag.