What methods are available to make my PS2 connect via USB adapter?

F5F Stay Refreshed Software PC Gaming What methods are available to make my PS2 connect via USB adapter?

What methods are available to make my PS2 connect via USB adapter?

What methods are available to make my PS2 connect via USB adapter?

J

janrooijen
Member

205

10-01-2022, 07:59 PM

#1

I recently got a PS2 to USB adapter for my old PS2 controller, which is a well-known model often used in tutorials, as shown at the bottom of this post. Since it’s a plug-and-play device, I added it to the 'Devices and Printers' area and downloaded the x360ce Controller Emulator. However, it doesn’t get any input from the controller and can’t create a default settings file. The controller still functions properly on the PS2 as expected. I’m looking for advice or help from anyone who might be using the same setup.

J

janrooijen

10-01-2022, 07:59 PM #1

I recently got a PS2 to USB adapter for my old PS2 controller, which is a well-known model often used in tutorials, as shown at the bottom of this post. Since it’s a plug-and-play device, I added it to the 'Devices and Printers' area and downloaded the x360ce Controller Emulator. However, it doesn’t get any input from the controller and can’t create a default settings file. The controller still functions properly on the PS2 as expected. I’m looking for advice or help from anyone who might be using the same setup.

K

Killerman1834
Posting Freak

885

10-03-2022, 12:59 AM

#2

Unless it's brand new (and even then), you should begin by checking all the connections from the USB cable on the board and rewiring them if necessary.

K

Killerman1834

10-03-2022, 12:59 AM #2

Unless it's brand new (and even then), you should begin by checking all the connections from the USB cable on the board and rewiring them if necessary.

S

SamMCKid
Junior Member

8

10-04-2022, 10:11 AM

#3

Unless it's brand new (and even then), you should begin by checking all the connections from the USB cable on the board and rewiring them if necessary.

S

SamMCKid

10-04-2022, 10:11 AM #3

Unless it's brand new (and even then), you should begin by checking all the connections from the USB cable on the board and rewiring them if necessary.

L

LeFinisseur
Junior Member

10

10-04-2022, 10:42 AM

#4

In the connection section, everything appears correct. The red analog signal on the controller lights up when the button is pressed, and it has been configured by Windows. The missing part is the input, which still isn't working even after recalibration.

L

LeFinisseur

10-04-2022, 10:42 AM #4

In the connection section, everything appears correct. The red analog signal on the controller lights up when the button is pressed, and it has been configured by Windows. The missing part is the input, which still isn't working even after recalibration.

U

unforg1ven
Junior Member

8

10-04-2022, 05:27 PM

#5

You have a replacement ready. After adjusting a few settings in the x360ce software, everything functions properly.

U

unforg1ven

10-04-2022, 05:27 PM #5

You have a replacement ready. After adjusting a few settings in the x360ce software, everything functions properly.