Ventoy
Ventoy
Linus shared his experience using Ventoy on a Windows 11 system with several ISO files. I tried it myself and faced issues after turning off the machine and booting into the boot manager—it wasn’t recognized as a bootable drive. Despite disabling secure boot and other precautions, the setup didn’t work. Could you assist me with this? I also followed a tutorial from a few months ago.
You might be experiencing problems with CSM and legacy BIOS systems. Verify the situation by checking your Ventoy formatted drive—there should be two partitions, though some entries may appear identical but differ. Secure boot isn’t as problematic since the Ventoy script creates a valid certificate for import into MOKUTIL, and it would still display correctly even if it were missing.
You're testing two different systems—2015 HP Pentium laptop and a newer 10th gen i5 HP Probook. Both behaved similarly, so you're likely dealing with an older BIOS setup. To ensure proper functionality, follow these steps:
1. **Check BIOS Settings**
- Restart both machines and enter the BIOS/UEFI settings (usually by pressing F2, F12, or Del during boot).
- Look for BIOS version and check if it matches your hardware specs.
2. **Update BIOS Firmware**
- Visit the manufacturer’s website for your motherboard model.
- Download the latest BIOS update and install it following the on-screen instructions.
3. **Verify Hardware Compatibility**
- Ensure all components (motherboard, RAM, storage) match the requirements of the new processor.
4. **Test in Safe Mode**
- Boot into safe mode to rule out driver or software conflicts.
5. **Consult Documentation**
- Refer to your motherboard’s manual for specific steps related to your model.
If issues persist, consider reaching out to a support forum or contacting the manufacturer directly.