Use MSI Afterburner to enhance the performance of a GTX760 graphics card.
Use MSI Afterburner to enhance the performance of a GTX760 graphics card.
I understand there are many discussions about overclocking, but with my limited understanding I’m not sure I’m ready to try it without guidance from someone who truly knows what works and what doesn’t.
I don’t want to seriously push my card, so I’m worried about causing damage.
Here is my GPU information: https://imgur.com/a/2tWNy
My CPU details are: https://imgur.com/a/KMRJR
Please let me know if you need any additional information.
I’m only seeking some advice on how much overclocking is safe and what adjustments should be made in MSI Afterburner to get a reasonable improvement.
I can’t say how much I value the time you’d spend helping me.
Thank you for your support.
To boost your GPU performance you need to raise both the core clock and memory clock with MSI Afterburner. I’d add 50 each time and then run a stress test to verify the overclock remains stable. Even if one overclock works, keep an eye on temperatures—stay below 80°C. Going slowly, increasing by 50 each step, won’t cause damage; your PC might shut down if things get too hot. Good luck!
To overclock your GPU you need to raise the core and memory clock with MSI Afterburner. I suggest increasing them by 50 each time and then perform a GPU stress test to verify stability. Even if an overclock works, keep temperatures under control—80°C is the safe limit. If you gradually increase by 50, you won’t risk damaging your card; your PC might shut down if it gets too hot. Good luck!
To overclock your GPU you need to raise the core and memory clock with MSI Afterburner. I suggest increasing them by 50 each time and then performing a GPU stress test to verify stability. Even if an overclock works, keep temperatures below 80°C. If you proceed slowly, increasing by 50 each step, don’t worry about damaging your card—your PC might shut down if it gets too hot. Good luck!
furkan68k18 :
To boost your GPU performance you need to raise both the core clock and memory clock with MSI Afterburner. I’d go up by 50 each time and then run a stress test to verify stability. Even if an overclock works, keep an eye on temperatures—80°C is the safe limit. Going slow and increasing in small steps is wise; your PC might shut down if things get too hot. Good luck!
The 760 could have a restricted power ceiling, it won't exceed 100%? I think you can marginally raise core voltage on the 760 by enabling "unlock voltage control" in the msi afterburners settings. This may let you achieve slightly better clock stability at the expense of increased heat.
The 760 could have a restricted power ceiling, it won't exceed 100%? I think you can marginally raise core voltage on the 760 if you enable "unlock voltage control" in the msi afterburners settings. This may help achieve slightly better clock stability at the expense of increased heat.
The 760 could have a locked power cap, preventing it from exceeding 100%. It seems you might be able to raise the core voltage slightly by enabling "unlock voltage control" in the MSI afterburners settings. This could help achieve higher stable clocks at the expense of increased heat.
Yes, there are potential problems if you push it to the absolute maximum. For me, the limit is around +145. I also see warnings from GPU-Z indicating "Limited by reliability Voltage" and "Limit by Operating Voltage."
Other than overheating, those issues aren’t significant. Setting the power cap to 145% lets the card draw more power than the default, which boosts performance but raises temperatures when overclocked. As long as temperatures stay within safe ranges during load, it’s acceptable.
The 760 could have a restricted power ceiling, it doesn’t exceed 100%? I think you can marginally raise core voltage on the 760 if you enable "unlock voltage control" in the msi afterburners settings. This may help achieve slightly better clock stability at the expense of increased heat. Yes, sorry. Are there any problems if I push it to the maximum? For me it’s around +145. I also see GPU-Z showing a Vrel, VOp "Limited by reliability Voltage", "Limit by Operating Voltage". Other than overheating, that shouldn’t be an issue. Setting the power cap to 145% lets the card draw more power than the NVIDIA baseline if needed, which raises heat when overclocked. As long as temperatures stay under control during load, 145% is acceptable. I’m still unsure about adjusting Core Voltage properly—I’ve read many tutorials but don’t know how to do it safely.
The maximum voltage in the afterburner is not 145%; it's actually 145% as a power limit. The value you recall of +12mV is minimal, so you can push it to +12mV.