USB-based Ethernet transmission.
USB-based Ethernet transmission.
I’m looking at your current configuration with two devices each having USB Micro Inputs. You’re using Micro USB to Ethernet, then switching to a USB-to-USB-Micro adapter via an Ethernet cable to send data. For a quick visual, here’s what you’re doing.
You’re asking if it’s feasible to remove both the Ethernet adapters and the Ethernet cable so you can directly connect two USB Micro devices to each other using only USB connections.
This setup is technically possible depending on your hardware and drivers. Some systems support direct USB-to-USB communication, especially with compatible micro controllers or firmware. However, you’ll need to ensure:
- Your micro controllers support USB-to-USB data transfer.
- The required chipset or driver is installed.
- The cables and connectors are correctly aligned.
If you try it, you might see a visual confirmation of the connection once the devices recognize each other. If not, check your device specifications or consult your manufacturer’s support.
Thanks in advance for clarifying this!
USB peer-to-peer connections are available but require specific settings. Simply connecting both USB ports with a passive cable won't work. The functionality often depends on proprietary software for file transfers. For reliable performance, Ethernet remains the best option. Devices using USB 3.0 can benefit from 2.5 gigabit adapters for quicker speeds. If they're USB 2.0, gigabit speeds are acceptable since USB speed will limit overall transfer rates.
You're looking to connect two devices using a single network cable, but the USB-to-USB connection isn't functioning as expected. It seems the setup isn't properly establishing a network link.
Others have mentioned your current configuration is ideal, offering longer cables and likely lower costs compared to USB-to-USB setups since the latter are quite specialized. For peak performance, consider 5Gb Ethernet USB adapters (though it's not confirmed they function without a switch, but they should in theory). USB 3.0 caps speed at 3.5Gb, so if you need higher speeds, those options become necessary.