F5F Stay Refreshed Hardware Desktop Urgent! - Motherboard capacitors damaged during delivery

Urgent! - Motherboard capacitors damaged during delivery

Urgent! - Motherboard capacitors damaged during delivery

Pages (3): 1 2 3 Next
R
ReborntoKill
Posting Freak
821
03-21-2017, 09:00 PM
#1
While shipping my PC likely caused some damage, it appears the PSU landed on the bottom of the motherboard and damaged two capacitors, bending several pins. In the photo they look bent, but both still grip one pin; the other is clearly broken when viewed sideways.

1. These capacitors are located near two USB ports I don’t use. Is it safe to start my PC without them?
2. I’m thinking about swapping them out, but I have no idea where to buy them. One listing mentions M 86V, 560, 6.3V and another M 86U, 560, 6.3V. If I search for 560uF and 6.3V capacitors on Digikey, I only find ones with a minimum diameter of 8mm. These seem to be 6mm through-hole aluminum electrolytic types.

Extra details: My motherboard is the MSI X470 Gaming Pro Carbon, and I’m based in Japan.
R
ReborntoKill
03-21-2017, 09:00 PM #1

While shipping my PC likely caused some damage, it appears the PSU landed on the bottom of the motherboard and damaged two capacitors, bending several pins. In the photo they look bent, but both still grip one pin; the other is clearly broken when viewed sideways.

1. These capacitors are located near two USB ports I don’t use. Is it safe to start my PC without them?
2. I’m thinking about swapping them out, but I have no idea where to buy them. One listing mentions M 86V, 560, 6.3V and another M 86U, 560, 6.3V. If I search for 560uF and 6.3V capacitors on Digikey, I only find ones with a minimum diameter of 8mm. These seem to be 6mm through-hole aluminum electrolytic types.

Extra details: My motherboard is the MSI X470 Gaming Pro Carbon, and I’m based in Japan.

J
jaap220
Senior Member
369
03-21-2017, 09:00 PM
#2
Verify if the link is faulty. The capacitor may warp slightly. Don’t stress about it.
J
jaap220
03-21-2017, 09:00 PM #2

Verify if the link is faulty. The capacitor may warp slightly. Don’t stress about it.

M
Mr_Gloku
Member
211
03-21-2017, 09:00 PM
#3
If the connection is still good, probably nothing to worry about.
M
Mr_Gloku
03-21-2017, 09:00 PM #3

If the connection is still good, probably nothing to worry about.

C
Cookinath
Junior Member
34
03-21-2017, 09:00 PM
#4
You might want to explore the USB ports to evaluate them. If needed, you'll likely find that none of them are functional unless you're actively using one.
C
Cookinath
03-21-2017, 09:00 PM #4

You might want to explore the USB ports to evaluate them. If needed, you'll likely find that none of them are functional unless you're actively using one.

X
xX_IceyWolf_Xx
Senior Member
629
03-21-2017, 09:00 PM
#5
Both components remain linked via a single pin, yet the second part appears clearly detached when viewed from the side.
X
xX_IceyWolf_Xx
03-21-2017, 09:00 PM #5

Both components remain linked via a single pin, yet the second part appears clearly detached when viewed from the side.

D
daniel10724
Junior Member
20
03-21-2017, 09:00 PM
#6
Visit an online store and have them reattach the pin without needing a replacement.
D
daniel10724
03-21-2017, 09:00 PM #6

Visit an online store and have them reattach the pin without needing a replacement.

J
justzu
Junior Member
14
03-21-2017, 09:00 PM
#7
Are they disconnected by a single pin? Should I attempt to power them on?
J
justzu
03-21-2017, 09:00 PM #7

Are they disconnected by a single pin? Should I attempt to power them on?

T
TheZsdAqw
Junior Member
44
03-21-2017, 09:00 PM
#8
Head over there, they’ll understand what to do. For now, it’s safe to use the motherboard, but first make sure you bend or straighten the USB header pins so they don’t touch each other. If you skip the USB header entirely, everything should work fine. Those caps are just for the headers.
T
TheZsdAqw
03-21-2017, 09:00 PM #8

Head over there, they’ll understand what to do. For now, it’s safe to use the motherboard, but first make sure you bend or straighten the USB header pins so they don’t touch each other. If you skip the USB header entirely, everything should work fine. Those caps are just for the headers.

_
_Dirty_
Member
163
03-21-2017, 09:00 PM
#9
No, it can't be done if the parts are cut off from the side of the board.
_
_Dirty_
03-21-2017, 09:00 PM #9

No, it can't be done if the parts are cut off from the side of the board.

Z
Z3B
Junior Member
3
03-21-2017, 09:00 PM
#10
Definitely, the process isn't too tough to solder. If needed, they might just swap it out.
Z
Z3B
03-21-2017, 09:00 PM #10

Definitely, the process isn't too tough to solder. If needed, they might just swap it out.

Pages (3): 1 2 3 Next