F5F Stay Refreshed Hardware Desktop Upgrade RAM to 3600 MHz for ASUS B550M-A with Ryzen 7 3700X

Upgrade RAM to 3600 MHz for ASUS B550M-A with Ryzen 7 3700X

Upgrade RAM to 3600 MHz for ASUS B550M-A with Ryzen 7 3700X

_
_Shipow_
Member
Find
72
09-25-2019, 05:58 PM
#1
Hey there! I built this PC with these specs: a Ryzen 7 3700X, Asus Prime B550M-A motherboard, 2x8 GB HP V6 RAM at 3600 MHz, and a WD Green M.2 SSD. I enabled the DCOP profile and tried setting things to 3600 MHz with 1.5V, but it didn’t work. It only started when I lowered it to 3066 MHz, and then I could push it up to 3133 MHz at 1.6V without issues—though I haven’t pushed it that high yet. I’m worried about whether the voltage settings are safe and if I can really hit the advertised speeds. Any tips or warnings?
Reply
Reply
_
_Shipow_
09-25-2019, 05:58 PM #1

Hey there! I built this PC with these specs: a Ryzen 7 3700X, Asus Prime B550M-A motherboard, 2x8 GB HP V6 RAM at 3600 MHz, and a WD Green M.2 SSD. I enabled the DCOP profile and tried setting things to 3600 MHz with 1.5V, but it didn’t work. It only started when I lowered it to 3066 MHz, and then I could push it up to 3133 MHz at 1.6V without issues—though I haven’t pushed it that high yet. I’m worried about whether the voltage settings are safe and if I can really hit the advertised speeds. Any tips or warnings?

Reply
Reply
X
xCyphlex
Member
Find
76
09-25-2019, 07:27 PM
#2
The ram is garbage. Fat chance to run it's rated frequency. 1.6v on this memory might not be ok..... it's not worth the risk imo. Nothing you're doing wrong. Just horrible ICs on them sticks. The memory controller doesn't like em.
Reply
Reply
X
xCyphlex
09-25-2019, 07:27 PM #2

The ram is garbage. Fat chance to run it's rated frequency. 1.6v on this memory might not be ok..... it's not worth the risk imo. Nothing you're doing wrong. Just horrible ICs on them sticks. The memory controller doesn't like em.

Reply
Reply
S
SHURIKP
Member
Find
60
09-26-2019, 02:35 AM
#3
Yes, you can try setting the voltage to 1.5 V and operating at 3066 MHz.
Reply
Reply
S
SHURIKP
09-26-2019, 02:35 AM #3

Yes, you can try setting the voltage to 1.5 V and operating at 3066 MHz.

Reply
Reply
K
Kramble921
Member
Find
230
09-28-2019, 07:33 PM
#4
Consider adjusting the timing settings to optimize performance. It seems the board might be assigning random values incorrectly, which could lead to instability.
Reply
Reply
K
Kramble921
09-28-2019, 07:33 PM #4

Consider adjusting the timing settings to optimize performance. It seems the board might be assigning random values incorrectly, which could lead to instability.

Reply
Reply
T
tlr13579
Member
Find
178
09-30-2019, 04:52 AM
#5
This price feels unreal at 1.5v. Perhaps a higher frequency like 2933MHz with a different configuration works better. Let's check if it can get posted.
Reply
Reply
T
tlr13579
09-30-2019, 04:52 AM #5

This price feels unreal at 1.5v. Perhaps a higher frequency like 2933MHz with a different configuration works better. Let's check if it can get posted.

Reply
Reply