F5F Stay Refreshed Hardware Desktop Upgrade CPU but can't set up new operating system.

Upgrade CPU but can't set up new operating system.

Upgrade CPU but can't set up new operating system.

C
ChocChocGaming
Junior Member
24
08-19-2018, 09:02 PM
#1
Hello everyone, looking for any advice on this problem. I'm replacing my 8700K with a 9900K, and everything seems to be working after the new CPU boots into BIOS. The error code 0xc0000428 keeps appearing. I've changed the RAM, removed all peripherals and HDDs, and even tried different GPUs and PSUs. I've checked every BIOS setting from secure boot to fast boot, but nothing seems to resolve it. I also ran diagnostics using CMD and tried various fixes for the bootloader and manager. Despite connecting a minimal setup, the issue persists when switching back to the 9900K. My motherboard has no visible damage, temperatures are normal in BIOS, and the CPU appears fine. I've also tested all suggested solutions. Could anyone help? Thanks!
C
ChocChocGaming
08-19-2018, 09:02 PM #1

Hello everyone, looking for any advice on this problem. I'm replacing my 8700K with a 9900K, and everything seems to be working after the new CPU boots into BIOS. The error code 0xc0000428 keeps appearing. I've changed the RAM, removed all peripherals and HDDs, and even tried different GPUs and PSUs. I've checked every BIOS setting from secure boot to fast boot, but nothing seems to resolve it. I also ran diagnostics using CMD and tried various fixes for the bootloader and manager. Despite connecting a minimal setup, the issue persists when switching back to the 9900K. My motherboard has no visible damage, temperatures are normal in BIOS, and the CPU appears fine. I've also tested all suggested solutions. Could anyone help? Thanks!

F
Frinex10
Posting Freak
806
08-21-2018, 06:13 AM
#2
It seems like your computer might be underperforming. Did you buy it recently?
F
Frinex10
08-21-2018, 06:13 AM #2

It seems like your computer might be underperforming. Did you buy it recently?

S
Seabreeze1998
Member
57
08-21-2018, 06:32 AM
#3
Begin by clearing the CMOS memory using the default settings in the BIOS. The code 0xc0000428 seems to point to a boot manager issue, though I’m not entirely confident. Search for it online.
S
Seabreeze1998
08-21-2018, 06:32 AM #3

Begin by clearing the CMOS memory using the default settings in the BIOS. The code 0xc0000428 seems to point to a boot manager issue, though I’m not entirely confident. Search for it online.

L
Lohktor
Junior Member
3
08-21-2018, 06:59 AM
#4
Do you require a specific BIOS version for your 9900k? The Z370 models didn’t support the 9xxx series at launch, so an update was necessary when upgrading from the 8700k on the Gigabyte Z370 Gaming 5. Otherwise, it might indicate a faulty CPU.
L
Lohktor
08-21-2018, 06:59 AM #4

Do you require a specific BIOS version for your 9900k? The Z370 models didn’t support the 9xxx series at launch, so an update was necessary when upgrading from the 8700k on the Gigabyte Z370 Gaming 5. Otherwise, it might indicate a faulty CPU.

T
TheLogicalCow
Junior Member
2
08-21-2018, 09:42 AM
#5
Hey team, found a used CPU on eBay. Think it could run smoothly for a year if new. The last owner mentioned problems, but I thought it might be a Windows issue, so I bought it anyway. In the past, faulty CPUs sometimes caused BIOS errors or crashes, but they usually didn’t affect the system. I’ve managed to boot Linux installers from USB with Ventus installed, though Windows media often freezes. I’ve tested several USBs to rule out bad installs. A friend has an ASRock board with a 9700K and I’m planning to try it out. I bought it very cheaply and can resell it as faulty if needed, keeping prices low. It’s a budget-friendly upgrade for now until I do a full overhaul.
T
TheLogicalCow
08-21-2018, 09:42 AM #5

Hey team, found a used CPU on eBay. Think it could run smoothly for a year if new. The last owner mentioned problems, but I thought it might be a Windows issue, so I bought it anyway. In the past, faulty CPUs sometimes caused BIOS errors or crashes, but they usually didn’t affect the system. I’ve managed to boot Linux installers from USB with Ventus installed, though Windows media often freezes. I’ve tested several USBs to rule out bad installs. A friend has an ASRock board with a 9700K and I’m planning to try it out. I bought it very cheaply and can resell it as faulty if needed, keeping prices low. It’s a budget-friendly upgrade for now until I do a full overhaul.

B
BlueStar_LH
Posting Freak
842
08-21-2018, 11:49 AM
#6
A new Windows 10 setup was completed using the latest BIOS, which is significantly newer than the release date of support updates. Despite this, I’m still facing problems. The system reports a boot manager issue but fails to start from USB alone without connected HDDs. This could point to a faulty chip or an incorrect BIOS configuration. I recall swapping a 9900k into a Z370 board once—my last attempt was on a second-hand unit priced around 100 GBP/euro. The previous owner had similar issues, though they didn’t specify the hardware. I’m considering testing it on a friend’s Z390 board next week to verify if the problem lies with my BIOS. The CPU appears clean and functional; after reinstalling, my 8700k launched Windows instantly. I’ll follow up once the board is tested, hoping it boots successfully and I can acquire another unit at a more reasonable price. I wasn’t aiming for a full upgrade until next year, so this purchase feels like a necessary step.
B
BlueStar_LH
08-21-2018, 11:49 AM #6

A new Windows 10 setup was completed using the latest BIOS, which is significantly newer than the release date of support updates. Despite this, I’m still facing problems. The system reports a boot manager issue but fails to start from USB alone without connected HDDs. This could point to a faulty chip or an incorrect BIOS configuration. I recall swapping a 9900k into a Z370 board once—my last attempt was on a second-hand unit priced around 100 GBP/euro. The previous owner had similar issues, though they didn’t specify the hardware. I’m considering testing it on a friend’s Z390 board next week to verify if the problem lies with my BIOS. The CPU appears clean and functional; after reinstalling, my 8700k launched Windows instantly. I’ll follow up once the board is tested, hoping it boots successfully and I can acquire another unit at a more reasonable price. I wasn’t aiming for a full upgrade until next year, so this purchase feels like a necessary step.

S
SladeYT
Junior Member
8
08-26-2018, 10:45 AM
#7
Hello, I checked the Z390 board and confirmed it is functioning properly.
S
SladeYT
08-26-2018, 10:45 AM #7

Hello, I checked the Z390 board and confirmed it is functioning properly.

N
NALLE_PUH
Member
170
08-26-2018, 07:31 PM
#8
Used a Z390 board and got the same outcome. I might have delayed upgrading to a 7900X3D if the 9900K had been an option.
N
NALLE_PUH
08-26-2018, 07:31 PM #8

Used a Z390 board and got the same outcome. I might have delayed upgrading to a 7900X3D if the 9900K had been an option.