Updated CPU performance to 4.6 Ghz at 1.39v

0Ping0FPS
Junior Member

02-07-2016, 07:06 AM

Is the performance at that speed acceptable? My system supports up to 62 C with a maximum team.
My setup includes:
Intel Core i7-6700K 4.0GHz Quad-Core Processor
NZXT Kraken x62
Asus MAXIMUS VIII FORMULA ATX LGA1151 Motherboard
Corsair Vengeance LED 32GB (4 x 8GB) DDR4-3000 Memory
Seagate FireCuda 1TB 3.5" 7200RPM Hybrid Internal Hard Drive
Asus GeForce GTX 1080 8GB ROG STRIX Video Card
EVGA 750W 80+ Gold Certified Fully-Modular ATX Power Supply
Phanteks Enthoo Evolv ATX Glass ATX Mid Tower Case
NZXT Hue+

0Ping0FPS

02-07-2016, 07:06 AM #1

Ms1990
Member

02-07-2016, 08:17 AM

A bit warm, yet secure. Particularly when employing any iteration of prime greater than 26.6.

Ms1990

02-07-2016, 08:17 AM #2

A bit warm, yet secure. Particularly when employing any iteration of prime greater than 26.6.

zamys
Senior Member

690

02-07-2016, 03:21 PM

Yes the temperatures are stable and the vcore remains under 1.4v.

zamys

02-07-2016, 03:21 PM #3

Yes the temperatures are stable and the vcore remains under 1.4v.

Kropo999
Member

02-07-2016, 11:59 PM

The temperatures are fine and the voltage core stays under 1.4v.
During the stress test on prime 95, the temperature reaches 74°C at its peak—is that acceptable?

Kropo999

02-07-2016, 11:59 PM #4

The temperatures are fine and the voltage core stays under 1.4v.
During the stress test on prime 95, the temperature reaches 74°C at its peak—is that acceptable?

Benkenobi2001
Junior Member

02-08-2016, 07:10 AM

A bit warm yet secure. Particularly when employing any iteration of prime greater than 26.6.

Benkenobi2001

02-08-2016, 07:10 AM #5

A bit warm yet secure. Particularly when employing any iteration of prime greater than 26.6.

TrainerGriffin
Member

233

02-08-2016, 03:56 PM

timeconsumer :
A bit warm, but still secure. Particularly if you're running any version of prime above 26.6.
I reduced my vcore to 1.365, and current capacity to 120% at the LLC level at 4, does that feel safe?
I tried prime 95 for an hour and 20 minutes with this configuration, and on cpu-z most of the time the vcore stays around 1.36v, is that acceptable?