Unusual! The PC fails to start (VGA issue) when the monitor isn't turned on.
Unusual! The PC fails to start (VGA issue) when the monitor isn't turned on.
Just for the new Alienware 2725DF, I was shocked by a long and three short beeps. I ran all the standard checks—swapped RAM, used the built-in GPU—but the problem persisted. I ordered a replacement motherboard, but it was still 50/50 or CPU. The motherboard swap didn’t help. I went for a different CPU, but it wasn’t delivered yet. I tried another DP cable and it worked! That was a relief. I turned everything off, decided to test again just in case the port is faulty, and switched the cable to a different slot. The issue returned. Then I realized I was turning off the monitor each time, which made it easier to reproduce the problem. Now I can fully recreate it: turn off the monitor, VGA error, then back on. Booting again! My Ryzen 5 7600 GB RAM 2GB, Gigabyte B650 gaming 7800XT, AW2725DF. I hope someone adds a BIOS setting to prevent this, because it’s frustrating. 😅
I verified the latest BIOS updates for those boards concerning GPU compatibility. It’s a straightforward diagnostic process, and I’m confirming there aren’t any other simple checks we won’t suggest.